Industrial chemicals · Taylor, TX
Certificate of Analysis

Sample Certificate of Analysis

Ethylene Glycol 50/50 Technical Grade

Technical · 50/50

Category
Alcohols & Glycols (B)
Revision
1.9

Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.

CAS number
107-21-1
Structure
2D chemical structure of Ethylene Glycol 50/50 Technical Grade
Structure · PubChem
Grade
Technical · 50/50
Assay specification
50.0 - 51.0 %, by volume
Answer summary

Sample specification reference for Ethylene Glycol 50/50 Technical Grade. Source-record results are reference values, not measurements for your lot.

Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).

Specifications

ParameterSpecificationSource reference resultTest Method
Assay (ethylene glycol)50.0 - 51.0 %, by volume50.06 %—
pH (Neat)7.7 – 8.78.2—
Viscosity (Dynamic)< 5 mPa.s3.8—
Freeze point-34.6 °F (-37.0 °C) max-34.8 °F (-37.1 °C)ASTM D1177
Ash5 Max mg/kg1.2 mg/kg—
Sulfate (SO4)3 ppm max0.20 ppmTurbidimetric, ACS procedure
Heavy metals (as Pb)0.51 ppm max0.042 ppmICP-OES / ACS heavy metals procedure
Acidity as Acetic Acid0.0026% max0.00023 %—
Chloride (Cl)0.45 ppm max0.062 ppm—
Diethylene Glycol0.026% max0.010 %—
Iron (Fe)0.057 ppm max0.013 ppm—
Residue after evaporation0.0027% max0.00065 %—
Color10 max2—
Specific gravity (20 °C)1.063 - 1.0731.068—
Composition50 % ethylene glycol / 50 % deionized water, by volumeConformsBy formulation; confirmed by specific gravity

Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.

Need the Certificate of Analysis for your lot? Just ask.

Tell us the lot number from the container label and we will send the certificate over at no charge.

ProductEthylene Glycol 50/50 Technical Grade