Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
Isopropyl Alcohol 70% USP Grade
USP Grade · 70%
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS number
- 67-63-0
- Structure
Structure · PubChem - Grade
- USP Grade · 70%
- Assay specification
- 68.0 - 72.0 %
- Answer summary
Sample specification reference for Isopropyl Alcohol 70% USP Grade. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-07-15 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Assay (isopropyl alcohol, by volume) | 68.0 - 72.0 % | 70.2 % | Distillation of 50.0 mL, then specific gravity of the distillate at 25° <841> |
| Acidity | not more than 1.0 mL of 0.020 N sodium hydroxide | 0.10 | Potentiometric titration to pH 8.5 with 0.020 N sodium hydroxide, 50 mL sample |
| Color (APHA) | Max 5, Pt-Co | 2 | — |
| Specific gravity @ 20 °C | 0.872 - 0.883 | 0.8770 | — |
| Water (by volume) | 28.0 - 32.0% | 29.8 % | — |
| Limit of nonvolatile residue | does not exceed 5 mg (0.01%) | Passes test | Evaporate 50 mL to dryness on a steam bath, dry at 105° for 1 hour |
| Identification (A: Infrared Absorption; B: GC retention time) | Meets requirements | Passes test | USP <197A> / GC-FID retention time vs. USP Reference Standard |
| Each other individual known impurity (ethyl ether, acetone, diisopropyl ether, 1-propanol, 2-butanol) | 0.072 % max | 0.00023 % | Gas chromatography |
| Methanol | 0.014 % max | 0.00012 % | Gas chromatography |
| Total organic impurities | 0.72 % max | 0.0067 % | Gas chromatography |
| Titrable Base | 0.000064 meq/g max | 0.000024 meq/g | — |
| Carbonyl compounds (as acetone) | 0.0013 % max | 0.00022 % | — |
| Composition | 70 % isopropyl alcohol / 30 % deionized water, by volume | Conforms | By formulation; confirmed by specific gravity |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
Need the Certificate of Analysis for your lot? Just ask.
Tell us the lot number from the container label and we will send the certificate over at no charge.