Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
Propylene Glycol 20% USP GRADE
USP · 20%
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS number
- 57-55-6
- Structure
Structure · PubChem - Grade
- USP · 20%
- Assay specification
- 20.0 - 21.0 %, by volume
- Answer summary
Sample specification reference for Propylene Glycol 20% USP GRADE. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Assay | 20.0 - 21.0 %, by volume | 20.18 % | — |
| Freeze point | 18.7 °F (-7.4 °C) max | 18.5 °F (-7.5 °C) | ASTM D1177 |
| Dilution water | Purified Water USP; conductivity ≤ 1.3 µS/cm @ 25 °C | Passes test | USP <1231> / conductivity USP <645> |
| Acidity | not more than 0.04 mL of 0.10 N sodium hydroxide | 0.01 | USP monograph titration, 0.10 N NaOH |
| Chloride | 0.0015% max | 0.0000045 % | USP <221> |
| Heavy metals | 1 ppm max | 0.06 ppm | Heavy metals (as Pb), sulfide colour comparison against lead standard |
| Iron | 0.11 ppm max | 0.007 ppm | — |
| Limit of Diethylene Glycol | 0.021% max | 0.00035 % | GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard |
| Limit of Ethylene Glycol | 0.021% max | 0.000088 % | GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard |
| Residue on ignition | 0.0016 wt% max | 0.00010 wt% | Ignition of 50 g, residue moistened with 0.5 mL sulfuric acid and ignited to constant weight |
| Sulfate | 0.0013% max | 0.00006 % | USP <221> |
| arsenic | 0.21 ppm max | 0.0052 ppm | — |
| dpg | 0.021 % max | 0.0069 % | — |
| pb | 0.21 mg/kg max | 0.0017 mg/kg | — |
| meg | 0.00021 % max | 0.00009 % | — |
| po | 0.00021 % max | 0.000045 % | — |
| tpg | 0.0062 % max | 0.0014 % | — |
| Color, Pt-Co | 10 APHA (maximum) | 1 APHA | Platinum-cobalt (APHA) color scale |
| Odor | Pass | Passes test | Sensory (odor) evaluation |
| Residual solvents | Pass | Passes test | USP <467> |
| Suspended matter | Pass | Passes test | — |
| Composition | 20 % propylene glycol / 80 % deionized water, by volume | Conforms | By formulation; confirmed by specific gravity |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
Need the Certificate of Analysis for your lot? Just ask.
Tell us the lot number from the container label and we will send the certificate over at no charge.