Sample Certificate of Analysis
Technical · 80%
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
Sample specification reference for Sodium Chlorite Flakes 80% - Technical Grade. Source-record results are reference values, not measurements for your lot.
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Assay (Sodium Chlorite as NaClO2) | 77.5 - 82.5 wt% | 79.7 wt% | — |
| Total Alkalinity (as NaOH) | 10% as NaOH maximum | 2.1 % | — |
| Appearance | White to off-white powder, crystals, or flakes | Passes test | — |
| Arsenic | 3 max. ppm | 0.057 ppm | — |
| Sodium Chloride (NaCl) | 11 - 19 wt% | 16.2 wt% | — |
| Heavy Metals (as Pb) | 20 max ppm | 1.2 ppm | — |
| Hydrogen peroxide (as H2O2) | 0.01 max. wt% | 0.0010 wt% | — |
| Lead | 10 max. ppm | 0.34 ppm | — |
| Mercury | 0.1 max. ppm | 0.0072 ppm | — |
| Sodium carbonate (as Na2CO3) | 2 max. wt% | 0.58 wt% | — |
| Sodium chlorate (as NaClO3) | 4 max. wt% | 1.08 wt% | — |
| Sodium hydroxide (as NaOH) | 3 max. wt% | 1.6 wt% | — |
| Sodium Sulfate (Na2SO4) | 3 max wt% | 0.58 wt% | — |
| Water (by difference) | 6 max wt% | 1.3 wt% | — |
| pH (1 % solution @ 25 °C) | 10.0 - 12.0 | 11.0 | Potentiometric, calibrated glass electrode |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
Tell us the lot number from the container label and we will send the certificate over at no charge.