Industrial chemicals · Taylor, TX
Certificate of Analysis

Sample Certificate of Analysis

Sodium Hydroxide 30% ACS Grade

ACS · 30%

Category
Bases & Salts (E)
Revision
1.6

Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.

CAS number
1310-73-2
Structure
2D chemical structure of Sodium Hydroxide 30% ACS Grade
Structure · PubChem
Grade
ACS · 30%
Assay specification
29.5 - 30.5 %
Answer summary

Sample specification reference for Sodium Hydroxide 30% ACS Grade. Source-record results are reference values, not measurements for your lot.

Last reviewed 2026-06-18 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).

Specifications

ParameterSpecificationSource reference resultTest Method
Assay (NaOH)29.5 - 30.5 %30.17 %—
Ammonium hydroxide precipitate0.006% max0.00045 %—
Calcium (Ca)0.0015% max0.000020 %—
Chloride (Cl)0.0012% max0.00034 %—
Heavy metals (as Ag)0.0006% max0.000013 %—
Iron (Fe)3 ppm max0.16 ppm—
Magnesium (Mg)0.0006% max0.0000084 %—
Mercury (Hg)0.03 ppm max0.00063 ppm—
Nickel (Ni)3 ppm max0.09 ppm—
Nitrogen compounds (as N)3 ppm max0.11 ppm—
Phosphate (PO4)3.4 ppm max0.074 ppm—
Potassium (K)0.006% max0.0008 %—
Sodium carbonate0.15 % max0.053 %—
Sulfate (SO4)0.00064% max0.00014 %—
Color (APHA)Max 203—
Specific gravity (20 °C)1.323 - 1.3331.330—
Composition30 % sodium hydroxide in deionized water, by weightConformsBy formulation; confirmed by specific gravity

Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.

Need the Certificate of Analysis for your lot? Just ask.

Tell us the lot number from the container label and we will send the certificate over at no charge.

ProductSodium Hydroxide 30% ACS Grade
Sodium Hydroxide 30% ACS Grade — Sample Certificate of Analysis | Alliance Chemical