Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
Toluene
Reagent
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS number
- 108-88-3
- Structure
Structure · PubChem - Grade
- Reagent
- Assay specification
- 99.5% Minimum
- Answer summary
Sample specification reference for Toluene. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-06-18 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Assay (Toluene) | 99.5% Minimum | 99.85 % | — |
| Acidity / Neutrality | Neutral (mg NaOH/100 ml) | Passes test | ASTM D 847 |
| Appearance | Clear liquid & free of sediment and haze when observed at 18.3 - 25.6 °C. | Passes test | Visual |
| Benzene | Max 0.100 Wt % | 0.014 Wt % | ASTM D2360 |
| Distillation Range (IBP to DP) | 1 °C max including 110.6 °C | Passes test | ASTM D 850 |
| Copper Corrosion | Pass (1A or 1B) | Passes test | ASTM D849 |
| H2S / SO2 | Not Detectable | Passes test | — |
| Nitration Grade Toluene conformance | Meets Standard | Passes test | ASTM D841 |
| Non-aromatics | Max 1.5 Vol % | 0.061 Vol % | ASTM D2360 |
| Residue after evaporation | =<0.001 % | 0.00024 % | — |
| Specific Gravity (15.56/15.56 °C) | 0.8690 - 0.8730 | 0.8714 | ASTM D891 |
| Sulfur compounds (as S) | =<0.003 % | 0.000074 % | — |
| Water | =<0.03 % | 0.008 % | Coulometric |
| C8 and heavier aromatics (GC) | Max 0.05 Wt % | 0.008 Wt % | ASTM D5917 / capillary GC |
| Flash point, closed cup | Min 4 °C (39 °F) | 5.0 °C (41 °F) | ASTM D56 (Tag closed cup) |
| refractive index at 68°f | 1.4919 - 1.4983 | 1.4949 | — |
| c8aromatics | 0.5 % weight max | 0.0072 | — |
| dry point | 233 °F (111.7 °C) max | 231.1 (110.6) | — |
| initial point | 229 °F (109.4 °C) min | 230 (110) | — |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
Need the Certificate of Analysis for your lot? Just ask.
Tell us the lot number from the container label and we will send the certificate over at no charge.