Industrial chemicals · Taylor, TXCertificado de análisis de muestra
Potassium Bicarbonate - FCC USP Grade
USP Grade
COA de muestra. Contacte con Alliance Chemical con su número de lote para solicitar un COA específico de ese lote.
- Número CAS
- 298-14-6
- Estructura
Estructura · PubChem - Grado
- USP Grade
- Especificación de pureza
- 99.5 - 101.5 %
- Answer summary
Referencia de especificaciones de muestra para Potassium Bicarbonate - FCC USP Grade. Los resultados del documento fuente son valores de referencia, no mediciones de su lote.
Especificaciones
| Parámetro | Especificación | Resultado de referencia del documento fuente | Método de ensayo |
|---|---|---|---|
| Assay (KHCO3, dried basis) | 99.5 - 101.5 % | 100.3 % | Acidimetric titration with 1 N hydrochloric acid VS using methyl red TS (1 mL = 100.1 mg KHCO3) |
| Description / Appearance | Colorless, transparent, monoclinic prisms or white, granular powder; stable in air | Passes test | Visual |
| Arsenic (as As) | 1.5 ppm by wt. Max. | 0.045 ppm by wt. | Elemental impurities (USP <232>/<233> style ICP determination) |
| Cadmium (as Cd) | 0.2 ppm by wt. Max. | 0.007 ppm by wt. | Elemental impurities (USP <232>/<233> style ICP determination) |
| Carbonate (FCC limit test) | Passes test (solution does not immediately turn more than a faint pink color) | Passes test | Dissolve 1 g without agitation in 20 mL water at not above 5 degrees C, add 2 mL 0.1 N hydrochloric acid and 2 drops phenolphthalein |
| Heavy Metals (as Pb) | 5 ppm max | 0.8 ppm | — |
| Identification | A 1:10 aqueous solution gives positive tests for Potassium and for Bicarbonate | Passes test | Chemical identity tests for Potassium and for Bicarbonate on a 1:10 aqueous solution |
| Lead (Pb) | Not more than 2 mg/kg | 0.057 mg/kg | APDC Extraction Method under Lead Limit Test, FCC Appendix IIIB |
| Loss on Drying | Not more than 0.25 % | 0.061 % | Dried over silica gel for 4 hours (FCC Appendix IIC) |
| Loss on Drying - USP acceptance criterion | Not more than 0.3 % | 0.061 % | Dry over silica gel for 4 hours |
| Mercury (as Hg) | 0.3 ppm by wt. Max. | 0.010 ppm by wt. | Elemental impurities (USP <232>/<233> style ICP determination) |
| Normal Carbonate | max. 2.5% | 0.35 % | — |
| Residual Solvents | Meets Requirements | Passes test | USP <467> (not required where no solvents are used in manufacture) |
| Bulk Density (informational, not a specification) | ~64 lb/cu.ft (published as informational only, not a specification item) | Passes test | Loose bulk density |
| pH (1% w/v aqueous solution @ 25 C) | 8.0 - 8.6 | 8.2 | USP <791> / potentiometric, calibrated glass electrode |
| Chloride (as Cl) | 0.001 % max | 0.0006 % | USP <221> chloride limit test / argentometric titration |
| Sulfate (as SO4) | Not more than 0.01 % | 0.0014 % | USP <221> sulfate limit test, turbidimetric against standard |
| Iron (Fe) | Not more than 5 mg/kg | 0.30 mg/kg | ICP-OES (FCC iron limit test) |
| Screen Analysis (sieve) | 100 % through 20 mesh (850 um); not more than 10 % through 200 mesh (75 um) | Passes test | ASTM E11 sieve stack / Ro-Tap, 10 min |
| calcium | 0.002 % max | 0.00018 % | — |
| insoluble | 0.01 % max | 0.0017 % | — |
| magnesium | 0.001 % max | 0.00013 % | — |
| tot. alk | 99.5 - 101.5 Wt.% | 100.3 Wt.% | — |
| cd | 0.2 Wt.ppm max | < 0.01 | — |
Los límites de especificación y los resultados del documento fuente se reproducen de la referencia actual del producto utilizada en la ficha técnica. Esta muestra no es un certificado emitido y no identifica un lote analizado. Contacte con Alliance Chemical indicando el producto y el número de lote para obtener documentación específica del lote.
¿Necesita el certificado de análisis de su lote? Solo pregúntenos.
Indíquenos el número de lote que figura en la etiqueta del envase y le enviaremos el certificado sin cargo.