Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
30% Propylene Glycol USP Grade
USP Grade · 30%
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS番号
- 57-55-6
- 構造
構造・PubChem - グレード
- USP Grade · 30%
- Assay specification
- 30.0 - 31.0 %, by volume
- Answer summary
Sample specification reference for 30% Propylene Glycol USP Grade. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-07-06 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Assay | 30.0 - 31.0 %, by volume | 30.21 % | — |
| Freeze point | 8.4 °F (-13.1 °C) max | 8.1 °F (-13.3 °C) | ASTM D1177 |
| Dilution water | Purified Water USP; conductivity ≤ 1.3 µS/cm @ 25 °C | Passes test | USP <1231> / conductivity USP <645> |
| Acidity | not more than 0.06 mL of 0.10 N sodium hydroxide | 0.02 | USP monograph titration, 0.10 N NaOH |
| Chloride | 0.0022% max | 0.0000129 % | USP <221> |
| Heavy metals | 1.5 ppm max | 0.17 ppm | Heavy metals (as Pb), sulfide colour comparison against lead standard |
| Iron | 0.16 ppm max | 0.019 ppm | — |
| Limit of Diethylene Glycol | 0.031% max | 0.00090 % | GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard |
| Limit of Ethylene Glycol | 0.031% max | 0.00019 % | GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard |
| Residue on ignition | 0.0023 wt% max | 0.00017 wt% | Ignition of 50 g, residue moistened with 0.5 mL sulfuric acid and ignited to constant weight |
| Sulfate | 0.0019% max | 0.00014 % | USP <221> |
| arsenic | 0.31 ppm max | 0.0097 ppm | — |
| dpg | 0.031 % max | 0.0095 % | — |
| pb | 0.31 mg/kg max | 0.0024 mg/kg | — |
| meg | 0.00031 % max | 0.00019 % | — |
| po | 0.00031 % max | 0.000069 % | — |
| tpg | 0.0092 % max | 0.0028 % | — |
| Color, Pt-Co | 10 APHA (maximum) | 1 APHA | Platinum-cobalt (APHA) color scale |
| Odor | Pass | Passes test | Sensory (odor) evaluation |
| Residual solvents | Pass | Passes test | USP <467> |
| Suspended matter | Pass | Passes test | — |
| Composition | 30 % propylene glycol / 70 % deionized water, by volume | Conforms | By formulation; confirmed by specific gravity |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
ロットの分析証明書が必要ですか？お気軽にお問い合わせください。
容器のラベルに記載されたロット番号をお知らせいただければ、無料で証明書をお送りします。