Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
A-A-59601E Type III Technical Grade
Technical
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS番号
- 64742-47-8
- 構造
構造・PubChem - グレード
- Technical
- Answer summary
Sample specification reference for A-A-59601E Type III Technical Grade. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Total chlorine content | 100 ppm, max. | 0.8 ppm | — |
| Aniline point | 73 to 89 °C | 81 °C | ASTM D611 |
| Aniline point (Type III) | 73 to 89 °C | 81 °C | ASTM D 611 |
| Initial boiling point | 220 °C min. | 232 °C | ASTM D86 |
| Color, Saybolt (Type III) | 30, min. | +30 | ASTM D 156 |
| Copper corrosion | 2a, max. | 1a | ASTM D 130 |
| Doctor test | Negative | Passes test | ASTM D 235 |
| Dry point | 295 °C max. | 266 °C | ASTM D86 |
| Flash point | 93.3 °C (200 °F) min. | 100 °C | ASTM D56 |
| Kauri-butanol value | 27 to 45 | 35 | ASTM D1133 |
| Odor (Type III) | Low and non-residual | Passes test | ASTM D 1296 |
| Non-volatile residue | 10 mg/100 ml, max. | 1.1 mg/100 ml | ASTM F 331 |
| Specific gravity @ 15.6/15.6 °C (60/60 °F) | 0.790 - 0.820 | 0.805 | ASTM D1298 / hydrometer |
| Distillation, 90 % recovered | 275 °C max. | 257 °C | ASTM D86 |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
ロットの分析証明書が必要ですか？お気軽にお問い合わせください。
容器のラベルに記載されたロット番号をお知らせいただければ、無料で証明書をお送りします。