Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
Ferric Chloride 10% Water Treatment Grade
Technical · 10%
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS番号
- 7705-08-0
- 構造
構造・PubChem - グレード
- Technical · 10%
- Assay specification
- 9.5 - 10.5 %
- Answer summary
Sample specification reference for Ferric Chloride 10% Water Treatment Grade. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Assay (FeCl3) | 9.5 - 10.5 % | 10.03 % | — |
| Sulfate (SO4 2-) | < 0.125 % | 0.012 % | Turbidimetric, BaCl2 / ASTM D516 |
| Iron (Fe, total) | 3.35 - 3.55 % | 3.45 % | — |
| Arsenic (As) | Max 0.75 mg/kg | 0.11 mg/kg | ICP-MS / EPA 200.8 |
| Lead (Pb) | Max 1.25 mg/kg | 0.09 mg/kg | ICP-MS / EPA 200.8 |
| Mercury (Hg) | Max 0.13 mg/kg | 0.000937 mg/kg | Cold vapour AAS / EPA 245.1 |
| Ferrous chloride (FeCl2) | 0.63 % max | 0.016 % | — |
| Ferrous (as Fe2) | 0.12% max | 0.007 % | — |
| Free acid (as HCl) | 0.25 % max | 0.043 % | — |
| Total insoluble matter | 0.05 % max | 0.0061 % | — |
| Composition | 10 % ferric chloride (FeCl3) in deionized water, by weight | Conforms | By formulation; confirmed by specific gravity |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
ロットの分析証明書が必要ですか？お気軽にお問い合わせください。
容器のラベルに記載されたロット番号をお知らせいただければ、無料で証明書をお送りします。