Sample Certificate of Analysis
ACS
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
Sample specification reference for Magnesium Hydroxide ACS. Source-record results are reference values, not measurements for your lot.
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Assay [Mg(OH)2] | 95.00 - 100.5 % | 97.75 % | — |
| Arsenic (As) | 3 ppm max | 0.1 ppm | — |
| Calcium (Ca) | 1.50 % max | 0.05 % | — |
| Carbonate (CO3) | To pass test | Passes test | — |
| Heavy metals (as Pb) | 0.01 % max | 0.001 % | — |
| Loss on drying @ 105 C | 2.00 % max | 0.4 % | — |
| Loss on ignition | 30 - 33.00 % | 31.50 % | — |
| Identification (magnesium) | To pass test | Passes test | ACS identification test - flame reaction and precipitation with ammonium phosphate |
| Insoluble in dilute hydrochloric acid | 0.02 % max | 0.005 % | Gravimetric - dissolve in dilute HCl, filter, ignite residue |
| Chloride (Cl) | 0.03 % max | 0.005 % | Turbidimetric comparison with AgNO3 against chloride standard |
| Sulfate (SO4) | 0.10 % max | 0.01 % | Turbidimetric comparison with BaCl2 against sulfate standard |
| Iron (Fe) | 0.02 % max | 0.002 % | Colorimetric, 1,10-phenanthroline (or ICP-OES) |
| Ammonium hydroxide precipitate (as R2O3) | 0.02 % max | 0.005 % | Gravimetric - NH4OH precipitation, ignition to mixed oxides |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
容器のラベルに記載されたロット番号をお知らせいただければ、無料で証明書をお送りします。