Industrial chemicals · Taylor, TX
Certificate of Analysis

Sample Certificate of Analysis

Propylene Glycol 20% USP Grade

USP · 20%

Category
Alcohols & Glycols (B)
Revision
1.6

Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.

CAS番号
57-55-6
構造
2D chemical structure of Propylene Glycol 20% USP Grade
構造・PubChem
グレード
USP · 20%
Assay specification
20.0 - 21.0 % v/v
Answer summary

Sample specification reference for Propylene Glycol 20% USP Grade. Source-record results are reference values, not measurements for your lot.

Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).

Specifications

ParameterSpecificationSource reference resultTest Method
Assay20.0 - 21.0 % v/v20.18 %—
Freeze point18.7 °F (-7.4 °C) max18.5 °F (-7.5 °C)ASTM D1177
Dilution waterPurified Water USP; conductivity ≤ 1.3 µS/cm @ 25 °CPasses testUSP <1231> / conductivity USP <645>
Aciditynot more than 0.04 mL of 0.10 N sodium hydroxide0.01USP monograph titration, 0.10 N NaOH
Chloride0.0015% max0.0000045 %USP <221>
Heavy metals1 ppm max0.06 ppmHeavy metals (as Pb), sulfide colour comparison against lead standard
Iron0.11 ppm max0.007 ppm—
Limit of Diethylene Glycol0.021% max0.00035 %GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard
Limit of Ethylene Glycol0.021% max0.000088 %GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard
Residue on ignition0.0016 wt% max0.00010 wt%Ignition of 50 g, residue moistened with 0.5 mL sulfuric acid and ignited to constant weight
Sulfate0.0013% max0.00006 %USP <221>
arsenic0.21 ppm max0.0052 ppm—
dpg0.021 % max0.0069 %—
pb0.21 mg/kg max0.0017 mg/kg—
meg0.00021 % max0.00009 %—
po0.00021 % max0.000045 %—
tpg0.0062 % max0.0014 %—
Color, Pt-Co10 APHA (maximum)1 APHAPlatinum-cobalt (APHA) color scale
OdorPassPasses testSensory (odor) evaluation
Residual solventsPassPasses testUSP <467>
Suspended matterPassPasses test—
Composition20 % propylene glycol / 80 % deionized water, by volumeConformsBy formulation; batch weights (scale ticket)

Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.

ロットの分析証明書が必要ですか?お気軽にお問い合わせください。

容器のラベルに記載されたロット番号をお知らせいただければ、無料で証明書をお送りします。

製品Propylene Glycol 20% USP Grade
Propylene Glycol 20% USP Grade — Sample Certificate of Analysis | Alliance Chemical