Industrial chemicals · Taylor, TX
Technical Data Sheet

Technical Data Sheet

40% Propylene Glycol Inhibited

40%

Alliance Code
40-propylene-glycol-inhibited
確認日
2026-07-16
Revision
1.4
CAS番号
57-55-6
構造
2D chemical structure of 40% Propylene Glycol Inhibited
構造・PubChem
グレード
40%
Last reviewed 2026-07-16 by Andre Taki, Chief Commercial Officer.

Identity & Composition

製品名
40% Propylene Glycol Inhibited
Alliance Code
40-propylene-glycol-inhibited
グレード
—
濃度
40%
CAS番号
57-55-6PubChem
化学式
C3H8O2PubChem
分子量
76.09PubChem
製品種別
混合物

Specifications

TestSpecificationTypicalMethodSource
Propylene glycol content39.5 - 40.5 % w/w40.0 % w/wFormulation (batch weights); verified by refractive index against an in-house propylene glycol calibration / relative density (ASTM D1122)Interpreted
Corrosion inhibitor package1.8 - 2.2 % w/w (nitrite-containing hybrid organic-acid)2.0 % w/wFormulation (batch weights)Interpreted
Nitrite (as NO2)960 ppm min. (calculated 1,300–2,700 ppm at the 2.0% dose)ConformsFormulation minimum (calculated from inhibitor dose)Interpreted
Freeze point-5 °F (-20.6 °C) maxapprox. -6 °F (-21 °C)ASTM D1177Interpreted

Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.

物理的及び化学的性質

Property値Source
外観Clear, colorless to pale yellow liquid, free of sediment and suspended matter (not dyed)Interpreted
臭いMild, characteristicAdjudicated
pH7.0 - 9.0 (typical)Interpreted
Specific Gravity (20 °C)1.035-1.043 (20 °C), calculated from formulationAdjudicated
密度approx. 1.04 g/mL (8.7 lb/gal) at 20 °CAdjudicated
沸点approx. 104 °C (219 °F) at 760 mmHgAdjudicated
融点Freeze point approx. -21 °C (-6 °F) at 40 wt% propylene glycolAdjudicated
引火点Not flammable (aqueous solution)Adjudicated
Solubility (water)Miscible with waterAdjudicated

Regulatory & Transport

DOT / 49 CFR

国連番号
非該当Adjudicated
危険有害性クラス
非該当Adjudicated
容器等級
非該当Adjudicated
正式輸送品名
非該当Adjudicated

GHS / OSHA HazCom 2012

注意喚起語
非該当Adjudicated
H-Codes (Hazard Statements)
該当しないECHA CLP Annex VI
P-Codes (Precautionary Statements)
該当しないECHA CLP Annex VI

許容濃度

OSHA PEL (29 CFR 1910.1000)
—no canonical
ACGIH TLV
—no canonical
NIOSH REL
—no canonical
NIOSH IDLH
—no canonical

Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: ECHA CLP Annex VI for harmonised classifications, NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.

Supplier Qualification Packet

One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for 40% Propylene Glycol Inhibited. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.

Download audit packet

Application Guidance

40% Propylene Glycol Inhibited is a glycol-based heat-transfer and freeze-protection fluid. Concentration sets the freeze and burst protection; the inhibitor package sets how long the system stays protected from corrosion.

  • Closed-loop heat transfer and process cooling
  • Data-centre and chilled-water freeze protection
  • HVAC hydronic loops and glycol makeup
  • Freeze and burst protection for idle or seasonal systems

必要な凍結・破裂防止性能に対して濃度を確認し、使用温度におけるエラストマーおよび金属材料との適合性を確認してください。食品または飲料水への偶発的な接触が起こり得る用途には、USPグレードまたは食品グレードのプロピレングリコールのみが適しています。インヒビター入りグレードは密閉系の熱媒体用途専用です。

Storage & Handling

Recommended Storage
Cool, dry, well-ventilated area in tightly sealed original containers. Neat glycols are combustible liquids with high flash points (roughly 99–111 °C) and do not require a solvent store; aqueous blends will not sustain combustion. Protect inhibited coolants from contamination and from freezing below their stated protection point.Class-level guidance — not product-specific; the SDS controls.
Handling Precautions
耐薬品性手袋および飛沫防護ゴーグルを着用してください。高温の表面や高温のプロセス機器との接触を避けてください。インヒビターは使用中に消耗します。やみくもに補充せず、監視してください。Class-level guidance — not product-specific; the SDS controls.
Incompatibilities
Strong oxidizers, strong acids and strong bases. Galvanized (zinc) surfaces are attacked by many inhibited coolant packages. Verify elastomer and gasket compatibility for the service temperature; EPDM is standard for glycol/water service.Class-level guidance — not product-specific; the SDS controls.
Shelf Life
Consult Technical Services for product-specific shelf life

For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.

Packaging & Logistics

Shipping Description (US DOT)

Not regulated for transport.

Confirm against shipping documents and carrier requirements before tender.

NMFC Class
55

Revision History

Last reviewed 2026-07-16 by Andre Taki, DOT Hazmat Specialist.

VersionDateChangeTrigger
1.42026-09-24Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
  • physicalProperties· canonical change (coa.data_provenance / adjudication)
canonical_change
1.32026-09-09Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
  • physicalProperties· canonical change (coa.data_provenance / adjudication)
canonical_change
1.22026-07-24Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
  • physicalProperties· canonical change (coa.data_provenance / adjudication)
canonical_change
1.12026-07-16Canonical data re-verified: 4 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
  • countryOfOrigin· canonical adjudication / reground (coa.data_provenance)
  • dotSubsidiaryHazardClass· canonical adjudication / reground (coa.data_provenance)
  • hsCode· canonical adjudication / reground (coa.data_provenance)
  • physicalProperties· canonical adjudication / reground (coa.data_provenance)
canonical_change
1.02026-05-20Initial URL-first TDS published from canonical chemistry registry.initial

This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.