Technical Data Sheet
Technical Grade
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Purity (assay, acetone) | 99.5 min (wt% - wet basis) | 99.84 wt% | GC | Interpreted |
| Aldehyde (As HCHO) | Max. 0.002% | 0.00050 % | — | Interpreted |
| Benzene | 2 max (mg/kg) | 0.29 mg/kg | GC | Interpreted |
| Distillation range | 1 °C range including 56 °C | Passes test | ASTM D1078 | Interpreted |
| Conformance standard | Satisfies ASTM D329-07 test criteria | Passes test | ASTM D329-07 | Interpreted |
| Isopropyl alcohol | Max. 0.05 % | 0.0094 % | — | Interpreted |
| Permanganate stability (permanganate time) | 120 min minimum (mins @ 25 °C) | 235 | ASTM D1363 | Interpreted |
| Miscibility with water | No Opalescence | Passes test | ASTM D1722 | Interpreted |
| Water | 0.5 max (wt%) | 0.14 wt% | ASTM D1364 (Karl Fischer) | Interpreted |
| Titrable acid | Max. 0.0003 meq/g | 0.000095 meq/g | — | Interpreted |
| Alkalinity (as NH3) | 0.001 max (wt%) | 0.00009 wt% | ASTM D1614 | Interpreted |
| Color (Pt-Co / APHA) | 5 max (Pt-Co/APHA) | 2 | ASTM D5386 / D1209 | Interpreted |
| Evaporation residue | Max. 0.001% | 0.00022 % | — | Interpreted |
| methanol | 500 mg/kg max | 48 mg/kg | — | Interpreted |
| nvr | 0.001 g/100mL max | 0.0009 | — | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade Technical Grade | — | — | current | current |
| ACS Grade | — | — | acetone-acs-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
| Property | 値 | Source |
|---|---|---|
| 外観 | Clear colorless liquid | Adjudicated |
| 形状 | Liquid | Published reference |
| 臭い | Sweet, fruity (characteristic ketone) odor | Adjudicated |
| 比重 | 0.79 at 20 °C (water = 1) | Adjudicated |
| 密度 | 0.791 at 68 °F (USCG, 1999) - Less dense than water; will float | Published reference |
| 沸点 | 56 °C (133 °F) at 760 mmHg | Adjudicated |
| 融点 | -95 °C (-139 °F) | Adjudicated |
| 引火点 | -20 to -17 °C (-4 to 1 °F), closed cup | Adjudicated |
| 蒸気圧 | 240–247 hPa (180–185 mmHg) at 20 °C | Adjudicated |
| 蒸気密度 | 2.0 (air = 1) | Adjudicated |
| Solubility (water) | Completely miscible with water | Adjudicated |
| 粘度 | 0.3 mPa·s at 25 °C | Adjudicated |
Polar solvent — purity vs. intended end-use (electronics, pharma, general industrial) is the dominant grade consideration. See application guidance for grade selection.
| Material | Rating | Conditions | Source |
|---|---|---|---|
| HDPE | Compatible | — | nwsci.com |
Compatibility is drawn from published manufacturer and supplier documentation for this product; each rating is sourced. Confirm against your specific duty cycle before equipment selection.
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
急性毒性値はSDS第11項またはNIOSH RTECSによる。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Acetone Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
| SKU | グレード | Conc. | Match | Notes |
|---|---|---|---|---|
| 179124 | ACS Reagent | 99.5% | Unverified candidate | ACS Reagent ≥99.5% |
Cross-references are informational. Confirm against the manufacturer's current specification before substitution. Competitor trademarks are property of their respective owners.
工業用溶剤:洗浄および脱脂、塗料、コーティング材および樹脂の希釈、接着剤およびグラスファイバーの洗浄。Adjudicated
使用上の制限: 工業用、業務用および研究室用に限る。経口摂取、医療用途または食品用途には使用しないこと。
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
UN1090, Acetone, 3, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-06-18 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.6 | 2026-10-13 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.5 | 2026-10-07 | Canonical data updated: 21 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.4 | 2026-10-05 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-09-30 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-22 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-18 | Canonical data re-verified: 3 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.