Technical Data Sheet
Technical Grade
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Glycerol content | 98.0 Min | 99.4 | — | Interpreted |
| Chlorides | 10 ppm Max | 1.6 ppm | — | Interpreted |
| Chlorinated compounds | 30 ppm Max | 3.4 ppm | — | Interpreted |
| Color | 40 Max (Pt - Co) | 5 | — | Interpreted |
| Fatty acid & ester | 1.00 Max | 0.20 | — | Interpreted |
| Heavy metals | 5 ppm Max | 0.7 ppm | — | Interpreted |
| Organic residue | 2.0% Max | 0.25 % | — | Interpreted |
| Specific Gravity @ 25/25°C | Min 1.259 | 1.2616 | — | Interpreted |
| Sulfates | Max 20 ppm | 2.3 ppm | — | Interpreted |
| Water | 0.5 % Max | 0.17 % | — | Interpreted |
| Sulfated ash | 0.01 % Max | 0.0025 % | Sulfated ash, gravimetric (sulfuric acid treatment), 600 °C | Interpreted |
| Diethylene glycol / ethylene glycol (GC) | Not detected (limit 0.1 % each) | Passes test | GC-FID (EP 2.4.30 / glycerin ID B procedure) | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade Technical Grade | — | — | current | current |
| Food | 75% | — | glycerin-75-food-grade | View TDS → |
| Food | 50% | — | glycerin-50-food-grade | View TDS → |
| Food | 25% | — | glycerin-25-food-grade | View TDS → |
| USP Grade | — | — | glycerin-usp-grade | View TDS → |
各グレードの代表的な含量は、直近ロットの平均値です。代替品として使用する前に、そのグレードがお客様の仕様を満たしていることをご確認ください。
| Property | 値 | Source |
|---|---|---|
| 外観 | Viscous clear liquid, transparent colorless | Adjudicated |
| 形状 | Liquid | Published reference |
| 臭い | Odorless | Adjudicated |
| pH | Neutral (5.5–8 in aqueous solution) | Adjudicated |
| 比重 | 1.263 at 20/20 °C (water = 1) | Adjudicated |
| 密度 | 1.2606 g/cm³ at 20 °C | Adjudicated |
| 沸点 | 290 °C (554 °F), with decomposition | Adjudicated |
| 融点 | 18–20 °C (64–68 °F); readily supercools and stays liquid | Adjudicated |
| 引火点 | 160–199 °C (320–390 °F) | Adjudicated |
| 蒸気圧 | Below 0.001 hPa at 20 °C (negligible) | Adjudicated |
| 蒸気密度 | 3.2 (air = 1) | Adjudicated |
| Solubility (water) | Completely miscible with water; hygroscopic | Adjudicated |
| 粘度 | About 1,400 mPa·s at 20 °C | Adjudicated |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
急性毒性値はSDS第11項またはNIOSH RTECSによる。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Glycerin Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
工業用配合品、インキ、接着剤、不凍液および潤滑剤における保湿剤、可塑剤および溶剤。Adjudicated
使用上の制限: 工業用グレード:食品、医薬品または化粧品用途には使用しないでください。
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Not regulated for transport.
Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.4 | 2026-10-20 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-10-08 | Canonical data updated: 23 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-09-30 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-17 | Canonical data re-verified: 3 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.