Technical Data Sheet
USP Grade
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Assay (C3H8O3, anhydrous basis) | 99.0 - 101.0 percent | 100.0 percent | USP periodate oxidation / sodium hydroxide titration (monograph Assay) | Interpreted |
| Chloride | NMT 0.001% | 0.00014 % | — | Interpreted |
| Chlorinated Compounds | NMT 0.003% of Cl | 0.00023 % | Morpholine reflux followed by silver-nitrate turbidity comparison | Interpreted |
| Color (APHA) | 10 Max APHA | 6 | AMT-FGQ-G10 | Interpreted |
| Diethylene Glycol | NMT 0.1% | 0.0044 % | Gas chromatography with flame-ionization detection | Interpreted |
| Ethylene glycol | 0.10 Max % | 0.0059 % | USP 41 (Identification Test B, gas chromatography) | Interpreted |
| Fatty Acids and Esters | NMT 1 mL of 0.5 N sodium hydroxide | 0.2 | Titration of a 50 g sample with 0.5 N sodium hydroxide and 0.5 N hydrochloric acid | Interpreted |
| Heavy Metals | NMT 5 micro-gm per g | 1.0 | Heavy metals (as Pb), sulfide colour comparison against lead standard | Interpreted |
| Individual Impurities, excluding Diethylene Glycol | NMT 0.1% | 0.022 % | Gas chromatography with flame-ionization detection | Interpreted |
| Related compounds (any individual impurity other than diethylene glycol) | not more than 0.1% | 0.022 % | USP gas chromatography, area normalization | Interpreted |
| Related compounds (total impurities, including diethylene glycol) | not more than 1.0% | 0.057 % | USP gas chromatography, area normalization | Interpreted |
| Residue on Ignition | NMT 0.01% | 0.0016 % | Ignition of a 50 g sample followed by sulfuric-acid treatment and ignition to constant weight | Interpreted |
| Specific gravity, 25/25 °C | 1.2612 Min | 1.2618 | USP <841> | Interpreted |
| Sulfate | 0.002 % max | 0.00019 % | USP <221> | Interpreted |
| Total Impurities, including Diethylene Glycol | NMT 1.0% | 0.057 % | Gas chromatography with flame-ionization detection | Interpreted |
| Water | NMT 5.0% | 0.20 % | — | Interpreted |
| related compounds | 0.1 % max | 0.07 % | — | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade USP Grade | — | — | current | current |
| Food | 75% | — | glycerin-75-food-grade | View TDS → |
| Food | 50% | — | glycerin-50-food-grade | View TDS → |
| Food | 25% | — | glycerin-25-food-grade | View TDS → |
| Technical Grade | — | — | glycerin-technical-grade | View TDS → |
各グレードの代表的な含量は、直近ロットの平均値です。代替品として使用する前に、そのグレードがお客様の仕様を満たしていることをご確認ください。
| Property | 値 | Source |
|---|---|---|
| 外観 | Clear, colorless, thick viscous liquid | Adjudicated |
| 形状 | Liquid | Published reference |
| 臭い | Odorless | Adjudicated |
| pH | Neutral (5.5–8 in aqueous solution) | Adjudicated |
| 比重 | 1.263 at 20/20 °C (water = 1) | Adjudicated |
| 密度 | 1.2606 g/cm³ at 20 °C | Adjudicated |
| 沸点 | 290 °C (554 °F), with decomposition | Adjudicated |
| 融点 | 18–20 °C (64–68 °F); readily supercools and stays liquid | Adjudicated |
| 引火点 | 160–199 °C (320–390 °F) | Adjudicated |
| 蒸気圧 | Below 0.001 hPa at 20 °C (negligible) | Adjudicated |
| 蒸気密度 | 3.2 (air = 1) | Adjudicated |
| Solubility (water) | Completely miscible with water; hygroscopic | Adjudicated |
| Refractive Index (nD 20) | 1.470-1.475 | Interpreted |
| 粘度 | About 1,400 mPa·s at 20 °C | Adjudicated |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
急性毒性値はSDS第11項またはNIOSH RTECSによる。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Glycerin USP Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Not regulated for transport.
Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.5 | 2026-10-20 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.4 | 2026-10-08 | Canonical data updated: 23 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-09-30 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-08-05 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-17 | Canonical data re-verified: 3 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.