Technical Data Sheet
Technical
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Sodium Chloride (NaCl) | 1,000 ppm Maximum | 158 ppm | — | Interpreted |
| Iron (Fe) | 20 ppm Maximum | 5.5 ppm | — | Interpreted |
| Loss on ignition, 27 - 300 C | max. 0.4 % | 0.13 % | — | Interpreted |
| Organic matter (as C) | 0.01 % Max | 0.0033 % | — | Interpreted |
| Screen analysis, U.S. Standard sieves (dense soda ash) | On 30 mesh (>600 micron): 8.0% Maximum cumulative; On 100 mesh (>150 micron): 85.0% Minimum cumulative; Through 200 mesh (<75 micron): 3.0% Maximum through | Passes test | — | Interpreted |
| Silica (SiO2) | 0.03 % Max | 0.0076 % | — | Interpreted |
| Sodium Carbonate (as Na2CO3) | 99.2% Minimum | 99.78 % | — | Interpreted |
| Sodium Oxide (Na2O) | 58.0% Minimum | 58.4 % | — | Interpreted |
| Matter insoluble in water | Max. 0.15% (% Mass, dry basis) | 0.024 % | ASTM E359 | Interpreted |
| Sodium Sulfate (Na2SO4) | 2,000 ppm Maximum | 293 ppm | — | Interpreted |
| Volatiles | 0.80% Maximum | 0.041 % | — | Interpreted |
| +20screen | 0.4 max | 0.14 | — | Interpreted |
| +40screen | 50 max | 30.37 | — | Interpreted |
| bd lb/ft3 | 56 lb/ft3 min | 60.03 | — | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| Property | 値 | Source |
|---|---|---|
| 外観 | White crystalline powder | Adjudicated |
| 形状 | Solid | Published reference |
| 臭い | Odorless | Published reference |
| pH | 11.2 - 11.6 | Interpreted |
| 密度 | 2.54 g/cu cm | Published reference |
| 沸点 | Decomposes on heating by CO2 loss | Adjudicated |
| 融点 | 856 °C | Adjudicated |
| 引火点 | N/A | Published reference |
| Solubility (water) | Freely soluble in water. Insoluble in ethanol | Published reference |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Soda Ash Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Not regulated for transport.
Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.4 | 2026-10-13 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-09-30 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-09-28 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-07-17 | Canonical data re-verified: 7 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.