Industrial chemicals · Taylor, TXTechnical Data Sheet
100% Ethylene Glycol Inhibited
Laboratory · 100%
Identity & Composition
- Product Name
- 100% Ethylene Glycol Inhibited
- Alliance Code
- 100-ethylene-glycol-inhibited
- Grade
- Laboratory
- Concentration
- 100%
- CAS Number
- 107-21-1PubChem
- Formula
- C2H6O2PubChem
- Molecular Weight
- 62.07PubChem
- Product Type
- mixture
Specifications
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Ethylene glycol content | 97.8 % by volume | 97.8 % by volume | — | Supplier specification |
| Reserve Alkalinity | 3 ml min. | 14.5 | — | Supplier specification |
| Freeze Point | -34°F max. | -35°F | — | Supplier specification |
| Nitrite | 2400 ppm min. | 2700 ppm | — | Supplier specification |
| Foaming tendency (volume / break time) | 150 mL max / 5 s max | Passes test | ASTM D1881 | Interpreted |
| Chloride (as Cl) | 25 ppm maximum | 1.0 ppm | ASTM D3634 | Interpreted |
| Corrosion in glassware, six metals | Pass — weight loss within ASTM D3306 limits for all six metals | Passes test | ASTM D1384 | Interpreted |
Specification values are guaranteed limits. Typical values are representative of production lots and are not guaranteed. Lot-specific certificates of analysis ship with every order.
Physical & Chemical Properties
One or more physical-property values are temporarily suppressed pending verification against vendor COA data. For complete properties refer to the Safety Data Sheet (SDS) or contact sales@alliancechemical.com.
| Property | Value | Source |
|---|---|---|
| Form | Liquid | Published reference |
| Odor | Odorless | Published reference |
| pH | 9.0 - 10.5 | Supplier specification |
| Specific Gravity (20 °C) | 1.110-1.125 | Supplier specification |
| Density | 1.115 at 68 °F (USCG, 1999) - Denser than water; will sink | Published reference |
| Boiling Point | 387.7 °F at 760 mmHg (NTP, 1992) | Published reference |
| Melting Point | -34 °F (-36.7 °C) maximum | Interpreted |
| Flash Point | 232 °F (NTP, 1992) | Published reference |
| Vapor Pressure | 0.06 mmHg at 68 °F ; 1 mmHg at 127.4 °F (NTP, 1992) | Published reference |
| Solubility (water) | greater than or equal to 100 mg/mL at 63.5 °F (NTP, 1992) | Published reference |
Polar solvent — purity vs. intended end-use (electronics, pharma, general industrial) is the dominant grade consideration. See application guidance for grade selection.
Materials of ConstructionService envelope ≈ 100%
| Material | Rating | Max T (°C) | Notes | Source |
|---|---|---|---|---|
Buna-N (NBR) elastomer | Fair | 60 | Acceptable for alcohols; poor for ketones. | Parker O-ring Chemical Compatibility |
EPDM elastomer | Fair | — | Good for alcohols, poor for esters | Cole-Parmer Chemical Compatibility |
Viton (FKM) elastomer | Fair | 80 | Swells in acetone and esters; avoid for those. | Parker O-ring Chemical Compatibility |
FFKM (Kalrez) fluoropolymer | Excellent | 200 | Premium ester / ketone sealing | Cole-Parmer Chemical Compatibility |
PTFE fluoropolymer | Excellent | 200 | Universal solvent compatibility. | Cole-Parmer Chemical Compatibility |
Borosilicate Glass glass ceramic | Excellent | 100 | Universally inert. | Cole-Parmer Chemical Compatibility |
Glass (borosilicate) glass ceramic | Excellent | 100 | Inert | Cole-Parmer Chemical Compatibility |
316L Stainless Steel metal | Excellent | 80 | Inert; preferred for high-purity solvent service. | Cole-Parmer Chemical Compatibility |
Aluminium metal | Good | 40 | Acceptable; avoid prolonged wet contact | Cole-Parmer Chemical Compatibility |
Carbon Steel metal | Fair | 50 | Trace moisture causes rust; flash-rust prevention required. | Cole-Parmer Chemical Compatibility |
HDPE thermoplastic | Fair | 40 | Swells with many polar solvents; verify per solvent. | Cole-Parmer Chemical Compatibility |
PP thermoplastic | Good | 50 | Acceptable but watch swelling with esters | Cole-Parmer Chemical Compatibility |
PVC thermoplastic | Fair | 25 | Esters soften PVC; avoid for esters | Cole-Parmer Chemical Compatibility |
Ratings reflect the service envelope (concentration × temperature) shown. Always confirm against your specific duty cycle and contact-time before equipment selection. The most cautious rating across overlapping references is shown.
Materials Selection Tool
Showing 13 of 13 materials compatible at the selected envelope.
| Material | Rating | Max T (°C) | Notes |
|---|---|---|---|
Buna-N (NBR) elastomer | Fair | 60 | Acceptable for alcohols; poor for ketones. |
EPDM elastomer | Fair | — | Good for alcohols, poor for esters |
Viton (FKM) elastomer | Fair | 80 | Swells in acetone and esters; avoid for those. |
FFKM (Kalrez) fluoropolymer | Excellent | 200 | Premium ester / ketone sealing |
PTFE fluoropolymer | Excellent | 200 | Universal solvent compatibility. |
Borosilicate Glass glass ceramic | Excellent | 100 | Universally inert. |
Glass (borosilicate) glass ceramic | Excellent | 100 | Inert |
316L Stainless Steel metal | Excellent | 80 | Inert; preferred for high-purity solvent service. |
Aluminium metal | Good | 40 | Acceptable; avoid prolonged wet contact |
Carbon Steel metal | Fair | 50 | Trace moisture causes rust; flash-rust prevention required. |
HDPE thermoplastic | Fair | 40 | Swells with many polar solvents; verify per solvent. |
PP thermoplastic | Good | 50 | Acceptable but watch swelling with esters |
PVC thermoplastic | Fair | 25 | Esters soften PVC; avoid for esters |
Regulatory & Transport
DOT / 49 CFR
- UN Number
- Not regulatedAdjudicated
- Hazard Class
- Not regulatedAdjudicated
- Packing Group
- Not regulatedAdjudicated
- Proper Shipping Name
- Not regulatedAdjudicated
GHS / OSHA HazCom 2012
- Signal Word
- WarningAdjudicated
- H-Codes (Hazard Statements)
- H302, H373Adjudicated
- P-Codes (Precautionary Statements)
- P260, P264, P270, P314, P501Adjudicated
Occupational Exposure Limits
- OSHA PEL (29 CFR 1910.1000)
- —no canonical
- ACGIH TLV
- —no canonical
- NIOSH REL
- —no canonical
- NIOSH IDLH
- —no canonical
Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: ECHA CLP Annex VI for harmonised classifications, NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.
Supplier Qualification Packet
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for 100% Ethylene Glycol Inhibited. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Catalog EquivalentsCross-reference vs major chemical suppliers
Sigma-Aldrich
| SKU | Grade | Conc. | Match | Notes |
|---|---|---|---|---|
| 293237 | anhydrous, 99.8% | 99.8% | Close | Sigma anhydrous; Alliance is inhibited (with corrosion inhibitor package). |
Cross-references are informational. Confirm against the manufacturer's current specification before substitution. Competitor trademarks are property of their respective owners.
Applications
- Anti-freezing agentlaballey.com
- Used in the automobile industrylaballey.com
- Manufacturing of resinslaballey.com
- Synthesis of polyester fiberslaballey.com
- Dehydrating agentlaballey.com
- Polyester manufacturing and synthetic waxes productionlaballey.com
Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.
Storage & Handling
- Recommended Storage
- Cool, well-ventilated flammable-liquid storage area. Tightly sealed original containers. Segregate from oxidizers and acids. Bond and ground bulk storage.Class-level guidance — not product-specific; the SDS controls.
- Handling Precautions
- Use chemical-resistant gloves and splash goggles. Bond and ground during transfer to prevent static accumulation. Eliminate ignition sources within vapor envelope.Class-level guidance — not product-specific; the SDS controls.
- Incompatibilities
- Strong oxidizers, strong acids, isocyanates, anhydrides. Hygroscopic — protect from atmospheric moisture for water-sensitive end uses.Class-level guidance — not product-specific; the SDS controls.
- Shelf Life
- Consult Technical Services for product-specific shelf life
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Packaging & Logistics
Shipping Description (US DOT)
Not regulated for transport.
Confirm against shipping documents and carrier requirements before tender.
Revision History
Last reviewed 2026-07-17 by Andre Taki, DOT Hazmat Specialist.
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.2 | 2026-07-22 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-07-17 | Canonical data re-verified: 7 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.