Industrial chemicals · Taylor, TXTechnical Data Sheet
30% Propylene Glycol Inhibited
Technical · 30%
Identity & Composition
- Product Name
- 30% Propylene Glycol Inhibited
- Alliance Code
- 30-propylene-glycol-inhibited
- Grade
- Technical
- Concentration
- 30%
- CAS Number
- 57-55-6PubChem
- Formula
- C3H8O2PubChem
- Molecular Weight
- 76.09PubChem
- Product Type
- mixture
Specifications
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Propylene glycol content | 27.0 – 33.0 (% by weight) | 30.0 % | — | Supplier specification |
| Reserve alkalinity | ≥ 3.0 mL at 30 vol % propylene glycol | 3.5 | ASTM D1121 | Commercial practice |
| Corrosion performance | Weight loss within ASTM D3306 limits on all six metals | Passes test | ASTM D1384 | Interpreted |
| Chloride in dilution water | < 25 ppm | 0.5 ppm | ASTM D512 | Interpreted |
| Acidity as Acetic Acid | 0.0015 % max | 0.0005 wt% | — | Derived by dilution |
| Chlorides as Cl | 0.58 ppm max | 0.22 ppm | — | Derived by dilution |
| Heavy Metals as Pb | 1.5 ppm max | 0.09 ppm | — | Derived by dilution |
| Iron | 0.31 ppm max | 0.05 ppm | — | Derived by dilution |
| Dipropylene glycol (DPG) | 0.15 wt% max | 0.075 wt% | GC area % (ASTM E202) | Derived by dilution |
| ash | 0.0015% max | 0.0002 wt% | — | Derived by dilution |
| Burst protection | -18 °F (-27.5 °C) at 30 vol % propylene glycol | Passes test | Dynalene PG series data table | Commercial practice |
Specification values are guaranteed limits. Typical values are representative of production lots and are not guaranteed. Lot-specific certificates of analysis ship with every order.
Available GradesSame CAS, alternate grades and concentrations
| Grade | Concentration | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade Technical | 30% | — | current | current |
| Technical Grade | 30% | — | 30-propylene-glycol-technical-grade | View TDS → |
| USP Grade | 30% | — | 30-propylene-glycol-usp-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
Physical & Chemical Properties
| Property | Value | Source |
|---|---|---|
| Appearance | Clear, colorless to pale liquid | Published reference |
| Color | Clear, "Water-White" | Supplier specification |
| Odor | Mild, characteristic | Published reference |
| pH | 9.5 – 10.5 | Supplier specification |
| Specific Gravity (20 °C) | 1.020 - 1.030 | Published reference |
| Density | 1.024 g/mL at 20 °C | Published reference |
| Boiling Point | 216 °F at 30 vol % propylene glycol | Commercial practice |
| Melting Point | 8 °F (-13.3 °C) at 30 vol % propylene glycol | Commercial practice |
| Flash Point | Not flammable (aqueous solution) | Published reference |
| Solubility (water) | Miscible with water | Published reference |
Polar solvent — purity vs. intended end-use (electronics, pharma, general industrial) is the dominant grade consideration. See application guidance for grade selection.
Materials of ConstructionService envelope ≈ 30%
| Material | Rating | Max T (°C) | Notes | Source |
|---|---|---|---|---|
Buna-N (NBR) elastomer | Fair | 60 | Acceptable for alcohols; poor for ketones. | Parker O-ring Chemical Compatibility |
EPDM elastomer | Fair | — | Good for alcohols, poor for esters | Cole-Parmer Chemical Compatibility |
Viton (FKM) elastomer | Fair | 80 | Swells in acetone and esters; avoid for those. | Parker O-ring Chemical Compatibility |
FFKM (Kalrez) fluoropolymer | Excellent | 200 | Premium ester / ketone sealing | Cole-Parmer Chemical Compatibility |
PTFE fluoropolymer | Excellent | 200 | Universal solvent compatibility. | Cole-Parmer Chemical Compatibility |
Borosilicate Glass glass ceramic | Excellent | 100 | Universally inert. | Cole-Parmer Chemical Compatibility |
Glass (borosilicate) glass ceramic | Excellent | 100 | Inert | Cole-Parmer Chemical Compatibility |
316L Stainless Steel metal | Excellent | 80 | Inert; preferred for high-purity solvent service. | Cole-Parmer Chemical Compatibility |
Aluminium metal | Good | 40 | Acceptable; avoid prolonged wet contact | Cole-Parmer Chemical Compatibility |
Carbon Steel metal | Fair | 50 | Trace moisture causes rust; flash-rust prevention required. | Cole-Parmer Chemical Compatibility |
HDPE thermoplastic | Fair | 40 | Swells with many polar solvents; verify per solvent. | Cole-Parmer Chemical Compatibility |
PP thermoplastic | Good | 50 | Acceptable but watch swelling with esters | Cole-Parmer Chemical Compatibility |
PVC thermoplastic | Fair | 25 | Esters soften PVC; avoid for esters | Cole-Parmer Chemical Compatibility |
Ratings reflect the service envelope (concentration × temperature) shown. Always confirm against your specific duty cycle and contact-time before equipment selection. The most cautious rating across overlapping references is shown.
Materials Selection Tool
Showing 13 of 13 materials compatible at the selected envelope.
| Material | Rating | Max T (°C) | Notes |
|---|---|---|---|
Buna-N (NBR) elastomer | Fair | 60 | Acceptable for alcohols; poor for ketones. |
EPDM elastomer | Fair | — | Good for alcohols, poor for esters |
Viton (FKM) elastomer | Fair | 80 | Swells in acetone and esters; avoid for those. |
FFKM (Kalrez) fluoropolymer | Excellent | 200 | Premium ester / ketone sealing |
PTFE fluoropolymer | Excellent | 200 | Universal solvent compatibility. |
Borosilicate Glass glass ceramic | Excellent | 100 | Universally inert. |
Glass (borosilicate) glass ceramic | Excellent | 100 | Inert |
316L Stainless Steel metal | Excellent | 80 | Inert; preferred for high-purity solvent service. |
Aluminium metal | Good | 40 | Acceptable; avoid prolonged wet contact |
Carbon Steel metal | Fair | 50 | Trace moisture causes rust; flash-rust prevention required. |
HDPE thermoplastic | Fair | 40 | Swells with many polar solvents; verify per solvent. |
PP thermoplastic | Good | 50 | Acceptable but watch swelling with esters |
PVC thermoplastic | Fair | 25 | Esters soften PVC; avoid for esters |
Regulatory & Transport
DOT / 49 CFR
- UN Number
- Not regulatedAdjudicated
- Hazard Class
- Not regulatedAdjudicated
- Packing Group
- Not regulatedAdjudicated
- Proper Shipping Name
- Not regulatedAdjudicated
GHS / OSHA HazCom 2012
- Signal Word
- Not regulatedAdjudicated
- H-Codes (Hazard Statements)
- Not applicableECHA CLP Annex VI
- P-Codes (Precautionary Statements)
- Not applicableECHA CLP Annex VI
Occupational Exposure Limits
- OSHA PEL (29 CFR 1910.1000)
- —no canonical
- ACGIH TLV
- —no canonical
- NIOSH REL
- —no canonical
- NIOSH IDLH
- —no canonical
Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: ECHA CLP Annex VI for harmonised classifications, NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.
Supplier Qualification Packet
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for 30% Propylene Glycol Inhibited. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Application Guidance
30% Propylene Glycol Inhibited (Technical) is a polar solvent. Grade selection (technical, ACS, electronics, USP) determines acceptable residue and impurity levels for the intended end-use.
- Cleaning and degreasing (technical-grade)
- Coatings, inks, and adhesives formulation
- Reaction solvent for chemical synthesis
- Pharmaceutical manufacturing (USP-grade)
- Electronics-grade cleaning and rinse applications
Flammable. Bond and ground equipment during transfer. Verify grade matches end-use specification before substitution.
Storage & Handling
- Recommended Storage
- Cool, well-ventilated flammable-liquid storage area. Tightly sealed original containers. Segregate from oxidizers and acids. Bond and ground bulk storage.Class-level guidance — not product-specific; the SDS controls.
- Handling Precautions
- Use chemical-resistant gloves and splash goggles. Bond and ground during transfer to prevent static accumulation. Eliminate ignition sources within vapor envelope.Class-level guidance — not product-specific; the SDS controls.
- Incompatibilities
- Strong oxidizers, strong acids, isocyanates, anhydrides. Hygroscopic — protect from atmospheric moisture for water-sensitive end uses.Class-level guidance — not product-specific; the SDS controls.
- Shelf Life
- Consult Technical Services for product-specific shelf life
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Packaging & Logistics
Shipping Description (US DOT)
Not regulated for transport.
Confirm against shipping documents and carrier requirements before tender.
Revision History
Last reviewed 2026-07-16 by Andre Taki, DOT Hazmat Specialist.
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.2 | 2026-07-24 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-07-16 | Canonical data re-verified: 4 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.