Industrial chemicals · Taylor, TX
Technical Data Sheet

Technical Data Sheet

Cadmium Oxide Powder ACS Reagent

ACS Reagent

Alliance Code
cadmium-oxide-powder-acs-reagent
Reviewed
2026-07-17
Revision
1.5
CAS number
1306-19-0
UN number
UN2570
Hazard class · packing group
6.1 · PG I
Structure
2D chemical structure of Cadmium Oxide Powder ACS Reagent
Structure · PubChem
Grade
ACS Reagent
Signal word
Danger
Hazards
Acute toxicityHealth hazardEnvironmental hazardH301 H330 H341 H350 H361fd H372 H410
Proper shipping name
Cadmium compounds (Cadmium oxide)
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer.

Identity & Composition

Product Name
Cadmium Oxide Powder ACS Reagent
Alliance Code
cadmium-oxide-powder-acs-reagent
Grade
ACS Reagent
Concentration
—
CAS Number
1306-19-0PubChem
Formula
CdOPubChem
Molecular Weight
128.41PubChem
Product Type
Pure substance

Specifications

TestSpecificationTypicalMethodSource
Assay (CdO)Min 99.7%99.90%—Interpreted
Nitrate (NO3)max. 0.01%0.0008 %—Interpreted
Insoluble in hydrochloric acid0.02% (Max.)0.0062 %—Interpreted
Substances not precipitated by hydrogen sulfide0.6% (Max.)0.026 %—Interpreted
Zinc (Zn)Max 0.001%0.00038 %—Interpreted
Chloride (Cl)max. 0.002%0.00027 %—Interpreted
Copper (Cu)max. 0.005%0.00022 %—Interpreted
Iron (Fe)max. 0.002%0.00046 %AASInterpreted
Lead (Pb)max. 0.01%0.00115 %AASInterpreted
Sulfate (SO4)max. 0.20%0.026 %—Interpreted
Arsenic, antimony and thallium (total)Max 0.002 %0.00045 %ICP-MS after acid digestionInterpreted

Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.

Available GradesSame CAS, alternate grades and concentrations

GradeConcentrationTypical AssaySKUTDS
This grade ACS Reagent——currentcurrent
Technical——cadmium-oxide-powderView TDS →

Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.

Physical & Chemical Properties

PropertyValueSource
AppearanceRed-brown to dark brown powderAdjudicated
FormSolidPublished reference
OdorOdorlessPublished reference
pH9-10Published reference
Density8.15 g/cm³ (crystalline); 6.95 g/cm³ (amorphous)Published reference
Boiling Point~1559 °C (sublimes)Published reference
Melting Point~1500 °C (>2732 °F, decomposes/sublimes)Published reference
Flash PointNot applicable (non-combustible solid)Published reference
Vapor PressureNegligiblePublished reference
Solubility (water)Insoluble in water (<1 mg/mL)Published reference

Regulatory & Transport

DOT / 49 CFR

UN Number
UN2570Adjudicated
Hazard Class
6.1Adjudicated
Packing Group
IAdjudicated
Proper Shipping Name
Cadmium compounds (Cadmium oxide)Adjudicated

GHS / OSHA HCS 2024

Signal Word
DangerAdjudicated
H-Codes (Hazard Statements)
H301, H330, H341, H350, H361fd, H372, H410Adjudicated
P-Codes (Precautionary Statements)
P201, P202, P260, P264, P270, P271, P273, P280, P284, P301+P310, P304+P340, P308+P313, P310, P314, P320, P321, P330, P391, P403+P233, P405, P501Adjudicated

Occupational Exposure Limits

OSHA PEL (29 CFR 1910.1000)
0.005 mg/m³ TWA (as Cd)OSHA 29 CFR 1910.1000
ACGIH TLV
—no canonical
NIOSH REL
Ca (carcinogen — lowest feasible concentration)NIOSH Pocket Guide
NIOSH IDLH
9 mg/m³ (as Cd)NIOSH Pocket Guide

Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.

Supplier Qualification Packet

One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Cadmium Oxide Powder ACS Reagent. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.

Download audit packet

Applications

  • Used as an electroplating chemical and in the manufacture of cadmium electrodesmubychem.com
  • Component of silver alloys, phosphors, semiconductors, glass and ceramic glazesmubychem.com

Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.

Storage & Handling

Recommended Storage
Keep container tightly closed in a cool, dry, well-ventilated place, protected from moisture, direct sunlight and heat; store locked up. Avoid formation of dust and aerosols, and store away from magnesium and magnesium alloys.Adjudicated
Handling Precautions
Use standard chemical PPE — splash goggles, gloves, lab coat. Refer to SDS for hazard-specific PPE requirements.Class-level guidance — not product-specific; the SDS controls.
Incompatibilities
Oxidizing agents; magnesium and magnesium alloys; light metals, aluminum, perchlorates, hydrogen sulfide, hydrogen peroxide and hydrazine salts (violent reaction or explosion risk); highly alkaline or acidic materials.Adjudicated
Shelf Life
60 monthslobachemie.com

For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.

Packaging & Logistics

Shipping Description (US DOT)

UN2570, Cadmium compounds (Cadmium oxide), 6.1, PG I

Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.

NMFC Class
60
Placard
Toxic
Packing Group
PG I

Revision History

Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).

VersionDateChangeTrigger
1.52026-10-13Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
  • storage_precautions· canonical change (coa.data_provenance / adjudication)
  • incompatible_materials· canonical change (coa.data_provenance / adjudication)
  • conditions_to_avoid· canonical change (coa.data_provenance / adjudication)
  • hazardous_decomposition_products· canonical change (coa.data_provenance / adjudication)
canonical_change
1.42026-10-08Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
  • ghsClassification· canonical change (coa.data_provenance / adjudication)
  • hazard_h_codes· canonical change (coa.data_provenance / adjudication)
  • hazard_p_codes· canonical change (coa.data_provenance / adjudication)
canonical_change
1.32026-09-30Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
  • appearance· canonical change (coa.data_provenance / adjudication)
canonical_change
1.22026-07-22Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
  • dotSubsidiaryHazardClass· canonical change (coa.data_provenance / adjudication)
  • dotProperShippingName· canonical change (coa.data_provenance / adjudication)
canonical_change
1.12026-07-17Canonical data re-verified: 7 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
  • countryOfOrigin· canonical adjudication / reground (coa.data_provenance)
  • dotProperShippingName· canonical adjudication / reground (coa.data_provenance)
  • ghsClassification· canonical adjudication / reground (coa.data_provenance)
  • hazard_h_codes· canonical adjudication / reground (coa.data_provenance)
  • hazard_p_codes· canonical adjudication / reground (coa.data_provenance)
  • hsCode· canonical adjudication / reground (coa.data_provenance)
  • physicalProperties· canonical adjudication / reground (coa.data_provenance)
canonical_change
1.02026-05-20Initial URL-first TDS published from canonical chemistry registry.initial

This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.