Industrial chemicals · Taylor, TX
Technical Data Sheet

Technical Data Sheet

Cyclohexanone Technical Grade

Technical Grade

CAS Number
108-94-1
Alliance Code
cyclohexanone-technical-grade
Generated
2026-08-31
Revision
1.3
Reviewed
2026-07-17 · Andre Taki
2D chemical structure of Cyclohexanone Technical Grade
Structure · PubChem
Last reviewed 2026-07-17 by Andre Taki, DOT Hazmat Specialist.

Identity & Composition

Product Name
Cyclohexanone Technical Grade
Alliance Code
cyclohexanone-technical-grade
Grade
Technical Grade
Concentration
CAS Number
108-94-1PubChem
Formula
C6H10OPubChem
Molecular Weight
98.14PubChem
Product Type
pure_substance

Specifications

TestSpecificationTypicalMethodSource
PurityNot less than 99.5099.85GCSupplier specification
Acidity (as Acetic Acid)0.0100 max0.0030ASTM D 1613Supplier specification
Distillate temperature interval (95 mL)≤ 1.5 ºC0.6 ºCSupplier specification
Water≤ 0.08 wt %0.03 wt %Supplier specification
Cyclohexanol0.50% max0.08%GC-FIDInterpreted

Specification values are guaranteed limits. Typical values are representative of production lots and are not guaranteed. Lot-specific certificates of analysis ship with every order.

Available GradesSame CAS, alternate grades and concentrations

GradeConcentrationTypical AssaySKUTDS
This grade Technical Gradecurrentcurrent
ACS Gradecyclohexanone-acs-gradeView TDS →

Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.

Physical & Chemical Properties

One or more physical-property values are temporarily suppressed pending verification against vendor COA data. For complete properties refer to the Safety Data Sheet (SDS) or contact sales@alliancechemical.com.

PropertyValueSource
FormLiquidPublished reference
Color15 maxSupplier specification
OdorODOR REMINISCENT OF PEPPERMINT & ACETONEPublished reference
Density0.9450 - 0.9500 g/cm³ (20 °C, ASTM D 4052)Supplier specification
Boiling Point153.0 - 157.0 ºCSupplier specification
Melting Point3 °F (NTP, 1992)Published reference
Flash Point111 °F (NTP, 1992)Published reference
Vapor Pressure5.2 mmHg at 77 °F ; 10 mmHg at 101.7 °F (NTP, 1992)Published reference
Solubility (water)50 to 100 mg/mL at 64 °F (NTP, 1992)Published reference

Regulatory & Transport

DOT / 49 CFR

UN Number
UN191549 CFR 172.101
Hazard Class
3Adjudicated
Packing Group
IIIAdjudicated
Proper Shipping Name
CyclohexanoneAdjudicated

GHS / OSHA HazCom 2012

Signal Word
DangerAdjudicated
H-Codes (Hazard Statements)
H226, H302, H312, H315, H318, H332, H335Adjudicated
P-Codes (Precautionary Statements)
P210, P233, P240, P241, P242, P243, P261, P271, P280, P303+P361+P353, P304+P340, P313, P370+P378, P403+P235, P501Adjudicated

Occupational Exposure Limits

OSHA PEL (29 CFR 1910.1000)
no canonical
ACGIH TLV
no canonical
NIOSH REL
no canonical
NIOSH IDLH
no canonical

Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: ECHA CLP Annex VI for harmonised classifications, NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.

Supplier Qualification Packet

One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Cyclohexanone Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.

Download audit packet

Applications

  • Intermediate for nylon production and solvent for paints, inks, and electronic materialshighchem.co.jp
  • High-performance solvent in coatings, adhesives, and printing inks, and chemical intermediate for Nylon 6 via caprolactamgneechemical.com
  • Solvent specified in alkyd and epoxy coating systems, gravure and packaging inks, solvent-based adhesives, and photosensitive resin formulationsgneechemical.com
  • Used in coatings, adhesives, inks, resins, rubber processing, and Nylon 6 productiongneechemical.com

Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.

Storage & Handling

Recommended Storage
Store in cool, dry, well-ventilated place, away from heat and oxidizing agentsgneechemical.com
Handling Precautions
Use standard chemical PPE — splash goggles, gloves, lab coat. Refer to SDS for hazard-specific PPE requirements.Class-level guidance — not product-specific; the SDS controls.
Incompatibilities
oxidizing agentsgneechemical.com
Shelf Life
12 monthsgneechemical.comStore in cool, dry, well-ventilated place, away from heat and oxidizing agents

For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.

Packaging & Logistics

Shipping Description (US DOT)

UN1915, Cyclohexanone, 3, PG III

Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.

NMFC Class
77.5
Placard
Flammable Liquid
Packing Group
PG III

Revision History

Last reviewed 2026-07-17 by Andre Taki, DOT Hazmat Specialist.

VersionDateChangeTrigger
1.32026-08-05Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
  • hazardClass· canonical change (coa.data_provenance / adjudication)
  • packingGroup· canonical change (coa.data_provenance / adjudication)
  • unNumber· canonical change (coa.data_provenance / adjudication)
canonical_change
1.22026-07-22Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
  • dotSubsidiaryHazardClass· canonical change (coa.data_provenance / adjudication)
canonical_change
1.12026-07-17Canonical data re-verified: 7 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
  • bulkThresholdGallons· canonical adjudication / reground (coa.data_provenance)
  • countryOfOrigin· canonical adjudication / reground (coa.data_provenance)
  • ghsClassification· canonical adjudication / reground (coa.data_provenance)
  • hazard_h_codes· canonical adjudication / reground (coa.data_provenance)
  • hazard_p_codes· canonical adjudication / reground (coa.data_provenance)
  • hsCode· canonical adjudication / reground (coa.data_provenance)
  • regulationRule· canonical adjudication / reground (coa.data_provenance)
canonical_change
1.02026-05-20Initial URL-first TDS published from canonical chemistry registry.initial

This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.