Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
Glycol Ether EE ACS
ACS
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS number
- 110-80-5
- Structure
Structure · PubChem - Grade
- ACS
- Assay specification
- Min 99.5%
- Answer summary
Sample specification reference for Glycol Ether EE ACS. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Purity (by GC) | Min 99.5% | 99.84% | Gas chromatography |
| Acidity (as CH3COOH) | Max 0.005% | 0.0011 | — |
| Acetaldehyde (CH3CHO) | max. 0.001% | 0.00016% | — |
| Aluminium (Al) | Max 0.00001% | 0.0000008% | — |
| Barium (Ba) | Max 0.000002% | 0.00000014% | — |
| Cadmium (Cd) | Max 0.000005% | 0.00000018% | — |
| Calcium (Ca) | Max 0.00005% | 0.0000037% | — |
| Chromium (Cr) | Max 0.000002% | 0.00000025% | — |
| Cobalt (Co) | Max 0.000002% | 0.00000012% | — |
| Colour | Max 10 Hazen | 4 | — |
| Copper (Cu) | Max 0.000002% | 0.00000020% | — |
| Identity | passes test | Passes test | IR-spectrum |
| Iron (Fe) | Max 0.00002% | 0.0000016% | — |
| Lead (Pb) | Max 0.00001% | 0.00000021% | — |
| Magnesium (Mg) | Max 0.00001% | 0.0000009% | — |
| Manganese (Mn) | Max 0.000002% | 0.00000018% | — |
| Nickel (Ni) | Max 0.000005% | 0.00000042% | — |
| Peroxide (as H2O2) | Max 0.005% | 0.00011 % | — |
| Potassium (K) | Max 0.0001% | 0.0000012% | — |
| Refractive index n20/D | 1.405 - 1.407 | 1.406 | — |
| Non-volatile matter | Max 0.002% | 0.00034% | — |
| Sodium (Na) | Max 0.0001% | 0.0000062% | — |
| Strontium (Sr) | Max 0.000002% | 0.00000010% | — |
| Water | max. 0.1% | 0.019 % | Karl Fischer (K.F.) |
| Weight/mL at 20°C | 0.9295 g | 0.9295 g | — |
| Zinc (Zn) | Max 0.00002% | 0.0000012% | — |
| Specific gravity @ 20/20 ℃ | 0.929 - 0.932 | 0.9300 | ASTM D4052 (oscillating U-tube) |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
Need the Certificate of Analysis for your lot? Just ask.
Tell us the lot number from the container label and we will send the certificate over at no charge.