Industrial chemicals · Taylor, TXCertificate of Analysis
Sample Certificate of Analysis
Methanol Technical Grade
Technical Grade
Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.
- CAS number
- 67-56-1
- Structure
Structure · PubChem - Grade
- Technical Grade
- Assay specification
- 99.85 Min
- Answer summary
Sample specification reference for Methanol Technical Grade. Source-record results are reference values, not measurements for your lot.
Last reviewed 2026-06-18 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Specifications
| Parameter | Specification | Source reference result | Test Method |
|---|---|---|---|
| Purity (CH3OH), wt % on dry basis | 99.85 Min | 99.93 % W/W | IMPCA 001-14 |
| Acetone | 30 Max mg/kg | 2.4 mg/kg | IMPCA 001-14 |
| Acidity as acetic acid | 30 Max mg/kg | 5.2 mg/kg | ASTM D 1613-12 |
| Alkalinity | Max 0.0003 wt% | 0.000052 wt% | — |
| Appearance | Clear & Free of suspended matter | Passes test | IMPCA 003-98 |
| Carbonisable substances (sulfuric acid wash test), Pt-Co scale | 30 Max | 5 | ASTM E 346-08 |
| Chloride as Cl | 0.5 Max mg/kg | 0.09 mg/kg | IMPCA 002-98 |
| Ethanol | 50 Max mg/kg | 16 mg/kg | IMPCA 001-14 |
| Hydrocarbons | Pass Test | Passes test | ASTM D 1722-09 |
| Iron in solution | 0.1 Max mg/kg | 0.017 mg/kg | ASTM E 394-09 |
| IBP @ 760 mm Hg | Max 64.7°C | 64.6°C | — |
| Potassium permanganate time test at 15°C | 50 MINUTES min | 73 | ASTM D 1363-11 |
| Non-volatile matter | 8 Max mg/1000 mL | 2.0 | ASTM D 1353-13 |
| Specific gravity 20°C/20°C | 0.7910 – 0.7930 | 0.7923 | ASTM D 4052-11 |
| Carbonizable substances | Max 50, Pt-Co Scale | 19 | — |
| Total Sulfur | Max 0.5 ppm | 0.12 ppm | — |
| Water | 0.100 Max % w/w | 0.04 % W/W | ASTM E 1064-12 |
| Distillation range @ 760 mmHg | 1.0°C to include 64.6°±0.1° Max | 64.6 °C | ASTM D 1078-11 |
| Color (Pt-Co) | 10 Pt Co max | 2 | ASTM D 1209-11 |
| Odour | Characteristic, non-residual | Passes test | ASTM D1296 |
Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.
Need the Certificate of Analysis for your lot? Just ask.
Tell us the lot number from the container label and we will send the certificate over at no charge.