Industrial chemicals · Taylor, TXTechnical Data Sheet
Methanol Technical Grade
Technical Grade
Identity & Composition
- Product Name
- Methanol Technical Grade
- Alliance Code
- methanol-technical-grade
- Grade
- Technical Grade
- Concentration
- —
- CAS Number
- 67-56-1PubChem
- Formula
- CH4OPubChem
- Molecular Weight
- 32.042PubChem
- Product Type
- pure_substance
Specifications
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Purity (CH3OH), wt % on dry basis | 99.85 Min | 99.95 % W/W | IMPCA 001-14 | Supplier specification |
| Acetone | 30 Max mg/kg | 3 mg/kg | IMPCA 001-14 | Supplier specification |
| Acidity as acetic acid | 30 Max mg/kg | 5 mg/kg | ASTM D 1613-12 | Supplier specification |
| Alkalinity | Max 0.0003 wt% | 0.00005 wt% | — | Supplier specification |
| Carbonisable substances (sulfuric acid wash test), Pt-Co scale | 30 Max | 5 | ASTM E 346-08 | Supplier specification |
| Chloride as Cl | 0.5 Max mg/kg | 0.1 mg/kg | IMPCA 002-98 | Supplier specification |
| Ethanol | 50 Max mg/kg | 20 mg/kg | IMPCA 001-14 | Supplier specification |
| Hydrocarbons | Pass Test | Passes test | ASTM D 1722-09 | Supplier specification |
| Iron in solution | 0.1 Max mg/kg | 0.02 mg/kg | ASTM E 394-09 | Supplier specification |
| IBP @ 760 mm Hg | Max 64.7°C | 64.5°C | — | Supplier specification |
| Potassium permanganate time test at 15°C | 50 MINUTES min | 75 | ASTM D 1363-11 | Supplier specification |
| Non-volatile matter | 8 Max mg/1000 mL | 2 | ASTM D 1353-13 | Supplier specification |
| Carbonizable substances | Max 50, Pt-Co Scale | 15 | — | Supplier specification |
| Sulphur | 0.5 Max mg/kg | 0.1 mg/kg | ASTM D 3961-98 or ASTM D 5453-12 | Supplier specification |
| Total Sulfur | Max 0.5 ppm | 0.1 ppm | — | Supplier specification |
| Water | 0.100 Max % w/w | 0.05 % W/W | ASTM E 1064-12 | Supplier specification |
Specification values are guaranteed limits. Typical values are representative of production lots and are not guaranteed. Lot-specific certificates of analysis ship with every order.
Available GradesSame CAS, alternate grades and concentrations
| Grade | Concentration | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade Technical Grade | — | — | current | current |
| ACS Reagent | — | — | methanol-acs-reagent-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
Physical & Chemical Properties
| Property | Value | Source |
|---|---|---|
| Appearance | Clear & Free of suspended matter | Supplier specification |
| Form | Liquid | Published reference |
| Color | 5 Max | Supplier specification |
| Odor | Characteristic, non-residual | Interpreted |
| Specific Gravity (20 °C) | 0.7910 – 0.7930 | Supplier specification |
| Density | 0.792 at 68 °F (USCG, 1999) - Less dense than water; will float | Published reference |
| Boiling Point | 1.0°C to include 64.6°±0.1° Max | Supplier specification |
| Melting Point | -144 °F (NTP, 1992) | Published reference |
| Flash Point | 52 °F (NTP, 1992) | Published reference |
| Vapor Pressure | 100 mmHg at 70.2 °F ; 237.87 mmHg at 100 °F (NTP, 1992) | Published reference |
| Solubility (water) | greater than or equal to 100 mg/mL at 70 °F (NTP, 1992) | Published reference |
Polar solvent — purity vs. intended end-use (electronics, pharma, general industrial) is the dominant grade consideration. See application guidance for grade selection.
Materials of Construction
| Material | Rating | Conditions | Source |
|---|---|---|---|
| HDPE | Compatible | Methanol ACS/HPLC grade, assay min. 99.8% (typical 99.99%), supplied in 20 liter HDPE packaging; source states no upper temperature or exposure-time bound | nwsci.com |
Compatibility is drawn from published manufacturer and supplier documentation for this product; each rating is sourced. Confirm against your specific duty cycle before equipment selection.
Materials Selection Tool
Showing 13 of 13 materials compatible at the selected envelope.
| Material | Rating | Max T (°C) | Notes |
|---|---|---|---|
Buna-N (NBR) elastomer | Fair | 60 | Acceptable for alcohols; poor for ketones. |
EPDM elastomer | Fair | — | Good for alcohols, poor for esters |
Viton (FKM) elastomer | Fair | 80 | Swells in acetone and esters; avoid for those. |
FFKM (Kalrez) fluoropolymer | Excellent | 200 | Premium ester / ketone sealing |
PTFE fluoropolymer | Excellent | 200 | Universal solvent compatibility. |
Borosilicate Glass glass ceramic | Excellent | 100 | Universally inert. |
Glass (borosilicate) glass ceramic | Excellent | 100 | Inert |
316L Stainless Steel metal | Excellent | 80 | Inert; preferred for high-purity solvent service. |
Aluminium metal | Good | 40 | Acceptable; avoid prolonged wet contact |
Carbon Steel metal | Fair | 50 | Trace moisture causes rust; flash-rust prevention required. |
HDPE thermoplastic | Fair | 40 | Swells with many polar solvents; verify per solvent. |
PP thermoplastic | Good | 50 | Acceptable but watch swelling with esters |
PVC thermoplastic | Fair | 25 | Esters soften PVC; avoid for esters |
Regulatory & Transport
DOT / 49 CFR
- UN Number
- UN123049 CFR 172.101
- Hazard Class
- 3Adjudicated
- Packing Group
- IIAdjudicated
- Proper Shipping Name
- MethanolAdjudicated
GHS / OSHA HazCom 2012
- Signal Word
- DangerAdjudicated
- H-Codes (Hazard Statements)
- H225, H301, H311, H331, H370ECHA CLP Annex VI
- P-Codes (Precautionary Statements)
- P210, P233, P240, P241, P242, P243, P260, P264, P270, P271, P280, P301+P310, P302+P352, P303+P361+P353, P304+P340, P307+P311, P308+P311, P312, P321, P330, P361, P370+P378, P403+P233, P403+P235, P405, P501ECHA CLP Annex VI
Occupational Exposure Limits
- OSHA PEL (29 CFR 1910.1000)
- 200 ppm TWAOSHA 29 CFR 1910.1000
- ACGIH TLV
- —no canonical
- NIOSH REL
- 200 ppm TWA / 250 ppm STELNIOSH Pocket Guide
- NIOSH IDLH
- 6000 ppmNIOSH Pocket Guide
Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: ECHA CLP Annex VI for harmonised classifications, NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.
Supplier Qualification Packet
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Methanol Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Catalog EquivalentsCross-reference vs major chemical suppliers
Sigma-Aldrich
| SKU | Grade | Conc. | Match | Notes |
|---|---|---|---|---|
| 179337 | ACS Reagent | 99.9% | Exact | ACS Reagent ≥99.9% |
Cross-references are informational. Confirm against the manufacturer's current specification before substitution. Competitor trademarks are property of their respective owners.
Application Guidance
Methanol Technical Grade (Technical Grade) is a polar solvent. Grade selection (technical, ACS, electronics, USP) determines acceptable residue and impurity levels for the intended end-use.
- Cleaning and degreasing (technical-grade)
- Coatings, inks, and adhesives formulation
- Reaction solvent for chemical synthesis
- Pharmaceutical manufacturing (USP-grade)
- Electronics-grade cleaning and rinse applications
Flammable. Bond and ground equipment during transfer. Verify grade matches end-use specification before substitution.
Storage & Handling
- Recommended Storage
- Cool, well-ventilated flammable-liquid storage area. Tightly sealed original containers. Segregate from oxidizers and acids. Bond and ground bulk storage.Class-level guidance — not product-specific; the SDS controls.
- Handling Precautions
- Use chemical-resistant gloves and splash goggles. Bond and ground during transfer to prevent static accumulation. Eliminate ignition sources within vapor envelope.Class-level guidance — not product-specific; the SDS controls.
- Incompatibilities
- Strong oxidizers, strong acids, isocyanates, anhydrides. Hygroscopic — protect from atmospheric moisture for water-sensitive end uses.Class-level guidance — not product-specific; the SDS controls.
- Shelf Life
- Consult Technical Services for product-specific shelf life
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Packaging & Logistics
Shipping Description (US DOT)
UN1230, Methanol, 3, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
Revision History
Last reviewed 2026-06-18 by Andre Taki, DOT Hazmat Specialist.
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.3 | 2026-08-05 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-22 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-18 | Canonical data re-verified: 3 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.