Industrial chemicals · Taylor, TX
Certificate of Analysis

Sample Certificate of Analysis

Soda Ash Technical Grade

Technical

Category
Inorganic Salts / Slurries (F)
Revision
1.4

Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.

CAS number
497-19-8
Structure
2D chemical structure of Soda Ash Technical Grade
Structure · PubChem
Grade
Technical
Answer summary

Sample specification reference for Soda Ash Technical Grade. Source-record results are reference values, not measurements for your lot.

Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).

Specifications

ParameterSpecificationSource reference resultTest Method
Sodium Chloride (NaCl)1,000 ppm Maximum158 ppm—
Iron (Fe)20 ppm Maximum5.5 ppm—
Loss on ignition, 27 - 300 Cmax. 0.4 %0.13 %—
Organic matter (as C)0.01 % Max0.0033 %—
Screen analysis, U.S. Standard sieves (dense soda ash)On 30 mesh (>600 micron): 8.0% Maximum cumulative; On 100 mesh (>150 micron): 85.0% Minimum cumulative; Through 200 mesh (<75 micron): 3.0% Maximum throughPasses test—
Silica (SiO2)0.03 % Max0.0076 %—
Sodium Carbonate (as Na2CO3)99.2% Minimum99.78 %—
Sodium Oxide (Na2O)58.0% Minimum58.4 %—
Matter insoluble in waterMax. 0.15% (% Mass, dry basis)0.024 %ASTM E359
Sodium Sulfate (Na2SO4)2,000 ppm Maximum293 ppm—
Volatiles0.80% Maximum0.041 %—
pH, 1% w/w aqueous solution @ 25 C11.2 - 11.611.4Potentiometric, glass electrode (ASTM E70)
+20screen0.4 max0.14—
+40screen50 max30.37—
bd lb/ft356 lb/ft3 min60.03—

Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.

Need the Certificate of Analysis for your lot? Just ask.

Tell us the lot number from the container label and we will send the certificate over at no charge.

ProductSoda Ash Technical Grade