Industrial chemicals · Taylor, TX
Certificate of Analysis

Sample Certificate of Analysis

Propylene Glycol 60% USP Grade

USP · 60%

Category
Alcohols & Glycols (B)
Revision
1.4

Sample COA. Contact Alliance Chemical with your lot number to request a lot-specific COA.

CAS番号
57-55-6
構造
2D chemical structure of Propylene Glycol 60% USP Grade
構造・PubChem
グレード
USP · 60%
Assay specification
60.0 - 61.0 %, by volume
Answer summary

Sample specification reference for Propylene Glycol 60% USP Grade. Source-record results are reference values, not measurements for your lot.

Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).

Specifications

ParameterSpecificationSource reference resultTest Method
Assay60.0 - 61.0 %, by volume60.05 %—
Freeze point-59.9 °F (-51.1 °C) max-60.0 °F (-51.1 °C)ASTM D1177
Dilution waterPurified Water USP; conductivity ≤ 1.3 µS/cm @ 25 °CPasses testUSP <1231> / conductivity USP <645>
Aciditynot more than 0.12 mL of 0.10 N sodium hydroxide0.01USP monograph titration, 0.10 N NaOH
Chloride0.0042% max0.000017 %USP <221>
Heavy metals3 ppm max0.24 ppmHeavy metals (as Pb), sulfide colour comparison against lead standard
Iron0.3 ppm max0.028 ppm—
Limit of Diethylene Glycol0.06% max0.0012 %GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard
Limit of Ethylene Glycol0.06% max0.00030 %GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard
Residue on ignition0.0043 wt% max0.00024 wt%Ignition of 50 g, residue moistened with 0.5 mL sulfuric acid and ignited to constant weight
Sulfate0.0036% max0.00024 %USP <221>
arsenic0.6 ppm max0.009 ppm—
dpg0.06 % max0.017 %—
pb0.6 mg/kg max0.0047 mg/kg—
meg0.0006 % max0.00029 %—
po0.0006 % max0.00013 %—
tpg0.018 % max0.0042 %—
Color, Pt-Co10 APHA (maximum)4 APHAPlatinum-cobalt (APHA) color scale
OdorPassPasses testSensory (odor) evaluation
Residual solventsPassPasses testUSP <467>
Suspended matterPassPasses test—
Composition60 % propylene glycol / 40 % deionized water, by volumeConformsBy formulation; confirmed by specific gravity

Specification limits and source-record results are reproduced from the current product reference used by the TDS. This sample is not an issued certificate and does not identify a tested lot. Contact Alliance Chemical with the product and lot number for lot-specific documentation.

ロットの分析証明書が必要ですか?お気軽にお問い合わせください。

容器のラベルに記載されたロット番号をお知らせいただければ、無料で証明書をお送りします。

製品Propylene Glycol 60% USP Grade