Technical Data Sheet
USP · 60%
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Assay | 60.0 - 61.0 %, by volume | 60.05 % | — | Interpreted |
| Freeze point | -59.9 °F (-51.1 °C) max | -60.0 °F (-51.1 °C) | ASTM D1177 | Interpreted |
| Dilution water | Purified Water USP; conductivity ≤ 1.3 µS/cm @ 25 °C | Passes test | USP <1231> / conductivity USP <645> | Interpreted |
| Acidity | not more than 0.12 mL of 0.10 N sodium hydroxide | 0.01 | USP monograph titration, 0.10 N NaOH | Interpreted |
| Chloride | 0.0042% max | 0.000017 % | USP <221> | Interpreted |
| Heavy metals | 3 ppm max | 0.24 ppm | Heavy metals (as Pb), sulfide colour comparison against lead standard | Interpreted |
| Iron | 0.3 ppm max | 0.028 ppm | — | Interpreted |
| Limit of Diethylene Glycol | 0.06% max | 0.0012 % | GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard | Interpreted |
| Limit of Ethylene Glycol | 0.06% max | 0.00030 % | GC, flame ionization detector, 0.53-mm x 30-m fused-silica G43 column, 2,2,2-trichloroethanol internal standard | Interpreted |
| Residue on ignition | 0.0043 wt% max | 0.00024 wt% | Ignition of 50 g, residue moistened with 0.5 mL sulfuric acid and ignited to constant weight | Interpreted |
| Sulfate | 0.0036% max | 0.00024 % | USP <221> | Interpreted |
| arsenic | 0.6 ppm max | 0.009 ppm | — | Interpreted |
| dpg | 0.06 % max | 0.017 % | — | Interpreted |
| pb | 0.6 mg/kg max | 0.0047 mg/kg | — | Interpreted |
| meg | 0.0006 % max | 0.00029 % | — | Interpreted |
| po | 0.0006 % max | 0.00013 % | — | Interpreted |
| tpg | 0.018 % max | 0.0042 % | — | Interpreted |
| Odor | Pass | Passes test | Sensory (odor) evaluation | Interpreted |
| Residual solvents | Pass | Passes test | USP <467> | Interpreted |
| Suspended matter | Pass | Passes test | — | Interpreted |
| Composition | 60 % propylene glycol / 40 % deionized water, by volume | Conforms | By formulation; confirmed by specific gravity | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade USP | 60% | — | current | current |
| — | 60% | — | propylene-glycol-60-inhibited | View TDS → |
| Technical | 60% | — | propylene-glycol-60-technical-grade | View TDS → |
| USP Grade | 50% | — | 50-propylene-glycol-usp-grade | View TDS → |
| Technical Grade | 40% | — | 40-propylene-glycol-technical-grade | View TDS → |
| USP Grade | 40% | — | 40-propylene-glycol-usp-grade | View TDS → |
| — | 20% | — | propylene-glycol-20-inhibited | View TDS → |
| Technical | 20% | — | propylene-glycol-20-technical-grade | View TDS → |
| USP | 20% | — | propylene-glycol-20-usp-grade | View TDS → |
| Technical Grade | — | — | propylene-glycol-technical-grade | View TDS → |
| USP Grade | — | — | propylene-glycol-usp-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
| Property | 値 | Source |
|---|---|---|
| 外観 | Clear, colorless to pale liquid | Adjudicated |
| 色 | 10 APHA (maximum) | Interpreted |
| 臭い | Mild, characteristic | Adjudicated |
| pH | Essentially neutral (unbuffered blend) | Adjudicated |
| 比重 | 1.051 (20 °C) | Adjudicated |
| 密度 | 1.051 g/mL at 20 °C | Adjudicated |
| 沸点 | ~107 °C | Adjudicated |
| 融点 | -51 °C (freeze / crystallization onset) | Adjudicated |
| 引火点 | Not flammable (aqueous solution) | Adjudicated |
| Solubility (water) | Miscible with water | Adjudicated |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Propylene Glycol 60% USP Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Propylene Glycol 60% USP Grade (USP) is a glycol-based heat-transfer and freeze-protection fluid. Concentration sets the freeze and burst protection; the inhibitor package sets how long the system stays protected from corrosion.
必要な凍結・破裂防止性能に対して濃度を確認し、使用温度におけるエラストマーおよび金属材料との適合性を確認してください。食品または飲料水への偶発的な接触が起こり得る用途には、USPグレードまたは食品グレードのプロピレングリコールのみが適しています。インヒビター入りグレードは密閉系の熱媒体用途専用です。
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Not regulated for transport.
Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.4 | 2026-10-13 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-09-09 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-24 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-17 | Canonical data re-verified: 3 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.