Technical Data Sheet
ACS Grade
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Assay (acetone) | 99.5 % Min | 99.81 % | GC, corrected for water content | Interpreted |
| Titrable acid | 0.0003 Max meq/g | 0.000042 meq/g | ASTM D1613 / ACS titration | Interpreted |
| Aldehyde (as HCHO) | 0.002% max | 0.00036 % | — | Interpreted |
| Titrable base | 0.0006 Max meq/g | 0.00010 meq/g | ASTM D1614 / ACS titration | Interpreted |
| Color (APHA / Pt-Co) | 10 Max | 1 | ASTM D1209 | Interpreted |
| Isopropyl alcohol | 0.05% max | 0.0050 % | — | Interpreted |
| Methanol | 0.05% max | 0.0027 % | — | Interpreted |
| Substances reducing permanganate (permanganate time test) | Color retains 120 min | 293 | ASTM D1363 | Interpreted |
| Residue after evaporation | 10 ppm max | 1.2 ppm | Gravimetric (evaporation of 100 g, dried 30 min at 105 °C) | Interpreted |
| Solubility In Water | Solution remains clear for 30 min. | Passes test | — | Interpreted |
| Ultraviolet absorbance (applies to ACS lots designated suitable for ultraviolet spectrophotometry; not tested on general-use ACS lots) | 400 nm 0.01; 350 nm 0.02; 340 nm 0.10; 330 nm 1.00 (max A.U.) | Passes test | UV spectrophotometry, 1 cm cell vs. water | Interpreted |
| Water (H2O) | 0.5 Max Wt.% | 0.09 Wt.% | ASTM D1364 (Karl Fischer) | Interpreted |
| Identification (infrared absorption) | Conforms to reference spectrum for acetone | Passes test | FT-IR, comparison to reference spectrum | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade ACS Grade | — | — | current | current |
| Technical Grade | — | — | acetone-technical-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
| Property | 値 | Source |
|---|---|---|
| 外観 | Clear, colorless liquid | Adjudicated |
| 形状 | Liquid | Published reference |
| 臭い | Sweet, fruity (characteristic ketone) odor | Adjudicated |
| 比重 | 0.79 at 20 °C (water = 1) | Adjudicated |
| 密度 | 0.791 at 68 °F (USCG, 1999) - Less dense than water; will float | Published reference |
| 沸点 | 56 °C (133 °F) at 760 mmHg | Adjudicated |
| 融点 | -95 °C (-139 °F) | Adjudicated |
| 引火点 | -20 to -17 °C (-4 to 1 °F), closed cup | Adjudicated |
| 蒸気圧 | 240–247 hPa (180–185 mmHg) at 20 °C | Adjudicated |
| 蒸気密度 | 2.0 (air = 1) | Adjudicated |
| Solubility (water) | Completely miscible with water | Adjudicated |
| Refractive Index (nD 20) | 1.3580 - 1.3600 | Interpreted |
| 粘度 | 0.3 mPa·s at 25 °C | Adjudicated |
Polar solvent — purity vs. intended end-use (electronics, pharma, general industrial) is the dominant grade consideration. See application guidance for grade selection.
| Material | Rating | Conditions | Source |
|---|---|---|---|
| HDPE | Compatible | — | nwsci.com |
Compatibility is drawn from published manufacturer and supplier documentation for this product; each rating is sourced. Confirm against your specific duty cycle before equipment selection.
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
急性毒性値はSDS第11項またはNIOSH RTECSによる。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Acetone ACS Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
| SKU | グレード | Conc. | Match | Notes |
|---|---|---|---|---|
| 179124 | ACS Reagent | 99.5% | Unverified candidate | ACS Reagent ≥99.5% |
Cross-references are informational. Confirm against the manufacturer's current specification before substitution. Competitor trademarks are property of their respective owners.
実験室および分析用溶媒(ACSグレード);ガラス器具の洗浄および乾燥;抽出。Adjudicated
使用上の制限: 工業用、業務用および研究室用に限る。経口摂取、医療用途または食品用途には使用しないこと。
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
UN1090, Acetone, 3, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-06-18 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.7 | 2026-10-13 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.6 | 2026-10-07 | Canonical data updated: 21 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.5 | 2026-10-05 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.4 | 2026-09-30 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-08-05 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-22 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-18 | Canonical data re-verified: 3 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.