Technical Data Sheet
ACS Grade
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Assay (by GC, corrected for water) | NLT 99.0% | 99.7% | GC, corrected for water | Interpreted |
| Acidity (as formic acid) | 0.01% max. | 0.0018% | — | Interpreted |
| Color (APHA) | ≤ 10 APHA | 4 | APHA color scale | Interpreted |
| Cyclohexanol | 0.05% max. | 0.007% | — | Interpreted |
| Residue after evaporation | ≤ 0.05 % | 0.0021 % | — | Interpreted |
| Water (wt%) | 0.05% max | 0.01% | — | Interpreted |
| Identification (IR) | Conforms to reference spectrum | Passes test | FT-IR, comparison to reference spectrum | Interpreted |
| Distillation range at 760 mmHg | 154.0 - 157.0 ºC | 155.5 C | ASTM D1078 | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade ACS Grade | — | — | current | current |
| Technical Grade | — | — | cyclohexanone-technical-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
| Property | 値 | Source |
|---|---|---|
| 外観 | Colorless liquid | Adjudicated |
| 形状 | Liquid | Published reference |
| 臭い | Peppermint- and acetone-like odor | Adjudicated |
| 比重 | 0.945–0.948 at 20–25 °C (water = 1) | Adjudicated |
| 密度 | 0.945 - 0.950 g/mL | Interpreted |
| 沸点 | 155–157 °C (311–314 °F) | Adjudicated |
| 融点 | -47 °C (-53 °F) | Adjudicated |
| 引火点 | 43–46 °C (109–115 °F), closed cup | Adjudicated |
| 蒸気圧 | 3.4 mmHg (4.5 hPa) at 20 °C | Adjudicated |
| Solubility (water) | Partly soluble in water (86–90 g/L at 20 °C); miscible with most organic solvents | Adjudicated |
| Refractive Index (nD 20) | 1.4500 - 1.4520 | Interpreted |
| 粘度 | 2.2 mPa·s at 20 °C | Adjudicated |
Polar solvent — purity vs. intended end-use (electronics, pharma, general industrial) is the dominant grade consideration. See application guidance for grade selection.
| Material | Rating | Max T (°C) | Notes | Source |
|---|---|---|---|---|
Buna-N (NBR) elastomer | Fair | 60 | Acceptable for alcohols; poor for ketones. | Parker O-ring Chemical Compatibility |
EPDM elastomer | Fair | — | Good for alcohols, poor for esters | Cole-Parmer Chemical Compatibility |
Viton (FKM) elastomer | Fair | 80 | Swells in acetone and esters; avoid for those. | Parker O-ring Chemical Compatibility |
FFKM (Kalrez) fluoropolymer | Excellent | 200 | Premium ester / ketone sealing | Cole-Parmer Chemical Compatibility |
PTFE fluoropolymer | Excellent | 200 | Universal solvent compatibility. | Cole-Parmer Chemical Compatibility |
Borosilicate Glass glass ceramic | Excellent | 100 | Universally inert. | Cole-Parmer Chemical Compatibility |
316L Stainless Steel metal | Excellent | 80 | Inert; preferred for high-purity solvent service. | Cole-Parmer Chemical Compatibility |
Aluminium metal | Good | 40 | Acceptable; avoid prolonged wet contact | Cole-Parmer Chemical Compatibility |
Carbon Steel metal | Fair | 50 | Trace moisture causes rust; flash-rust prevention required. | Cole-Parmer Chemical Compatibility |
HDPE thermoplastic | Fair | 40 | Swells with many polar solvents; verify per solvent. | Cole-Parmer Chemical Compatibility |
PP thermoplastic | Good | 50 | Acceptable but watch swelling with esters | Cole-Parmer Chemical Compatibility |
PVC thermoplastic | Fair | 25 | Esters soften PVC; avoid for esters | Cole-Parmer Chemical Compatibility |
Ratings reflect the service envelope (concentration × temperature) shown. Always confirm against your specific duty cycle and contact-time before equipment selection. The most cautious rating across overlapping references is shown.
Showing 12 of 12 material ratings within the selected envelope.
| Material | Rating | Max T (°C) | Notes |
|---|---|---|---|
Buna-N (NBR) elastomer | Fair | 60 | Acceptable for alcohols; poor for ketones. |
EPDM elastomer | Fair | — | Good for alcohols, poor for esters |
Viton (FKM) elastomer | Fair | 80 | Swells in acetone and esters; avoid for those. |
FFKM (Kalrez) fluoropolymer | Excellent | 200 | Premium ester / ketone sealing |
PTFE fluoropolymer | Excellent | 200 | Universal solvent compatibility. |
Borosilicate Glass glass ceramic | Excellent | 100 | Universally inert. |
316L Stainless Steel metal | Excellent | 80 | Inert; preferred for high-purity solvent service. |
Aluminium metal | Good | 40 | Acceptable; avoid prolonged wet contact |
Carbon Steel metal | Fair | 50 | Trace moisture causes rust; flash-rust prevention required. |
HDPE thermoplastic | Fair | 40 | Swells with many polar solvents; verify per solvent. |
PP thermoplastic | Good | 50 | Acceptable but watch swelling with esters |
PVC thermoplastic | Fair | 25 | Esters soften PVC; avoid for esters |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
急性毒性値はSDS第11項またはNIOSH RTECSによる。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Cyclohexanone ACS Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
UN1915, Cyclohexanone, 3, PG III
包装に応じた規制: 非バルク包装(119 gal以下、例:ドラム、ペール、缶)は、可燃性液体への再分類(49 CFR 173.150(f))により規制対象外として輸送される。バルク包装(トート/IBC、119 gal超)は上記のDOT区分により完全に規制対象として輸送される。 可燃性液体への再分類は、他の輸送手段が実行不可能な場合を除き、船舶又は航空機による輸送には適用されない(49 CFR 173.120(b)(2))。
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.7 | 2026-10-08 | Canonical data updated: 26 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.6 | 2026-10-07 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.5 | 2026-10-05 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.4 | 2026-09-30 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-08-05 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-22 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-07-17 | Canonical data re-verified: 7 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.