Technical Data Sheet
ACS Reagent
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Acidity | To pass test | Passes test | — | Interpreted |
| Benzene (GC) | max 2 ppm | 0.15 wt ppm | GC | Interpreted |
| Color (APHA) | max 10 | 5 | — | Interpreted |
| Copper Corrosion | To Pass | Passes test | — | Interpreted |
| Doctor Test | negative | Passes test | — | Interpreted |
| Residue After Evaporation | max. 10 ppm | 2 ppm | — | Interpreted |
| Substances darkened by sulfuric acid | Passes test | Passes test | — | Interpreted |
| Sulphur compounds (as S) | max. 0.005 % | 0.00020 % | — | Interpreted |
| Water | 0.02% max. | 0.003 % | Coulometry | Interpreted |
| Identification (GC-FID) | Conforms to reference chromatogram | Passes test | GC-FID retention profile vs. reference standard | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade ACS Reagent | — | — | current | current |
| Technical Grade | — | — | petroleum-ether-technical-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
| Property | 値 | Source |
|---|---|---|
| 外観 | Clear, colorless liquid | Adjudicated |
| 形状 | Liquid | Published reference |
| 臭い | Petroleum (gasoline-like) odor | Adjudicated |
| 比重 | 0.64–0.66 at 20 °C (water = 1) | Adjudicated |
| 沸点 | 35–60 °C (95–140 °F) boiling range | Adjudicated |
| 引火点 | Below -18 °C (0 °F), closed cup | Adjudicated |
| 蒸気圧 | About 540 mmHg (724 hPa) at 20 °C | Adjudicated |
| Solubility (water) | Insoluble in water; miscible with most organic solvents | Adjudicated |
| Material | Rating | Max T (°C) | Notes | Source |
|---|---|---|---|---|
Buna-N (NBR) elastomer | Good | 80 | Good for non-aromatic hydrocarbons; poor for aromatics. | Parker O-ring Chemical Compatibility |
EPDM elastomer | Not recommended | — | Swells in hydrocarbons; never use. | Parker O-ring Chemical Compatibility |
Viton (FKM) elastomer | Excellent | 100 | Standard for hydrocarbon service. | Parker O-ring Chemical Compatibility |
PTFE fluoropolymer | Excellent | 200 | Universal. | Cole-Parmer Chemical Compatibility |
316L Stainless Steel metal | Excellent | 100 | Inert. | Cole-Parmer Chemical Compatibility |
Carbon Steel metal | Good | 80 | Acceptable for dry hydrocarbons. | Cole-Parmer Chemical Compatibility |
HDPE thermoplastic | Not recommended | — | Aromatic solvents swell and dissolve HDPE. | Cole-Parmer Chemical Compatibility |
Ratings reflect the service envelope (concentration × temperature) shown. Always confirm against your specific duty cycle and contact-time before equipment selection. The most cautious rating across overlapping references is shown.
Showing 7 of 7 material ratings within the selected envelope.
| Material | Rating | Max T (°C) | Notes |
|---|---|---|---|
Buna-N (NBR) elastomer | Good | 80 | Good for non-aromatic hydrocarbons; poor for aromatics. |
EPDM elastomer | Not recommended | — | Swells in hydrocarbons; never use. |
Viton (FKM) elastomer | Excellent | 100 | Standard for hydrocarbon service. |
PTFE fluoropolymer | Excellent | 200 | Universal. |
316L Stainless Steel metal | Excellent | 100 | Inert. |
Carbon Steel metal | Good | 80 | Acceptable for dry hydrocarbons. |
HDPE thermoplastic | Not recommended | — | Aromatic solvents swell and dissolve HDPE. |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
急性毒性値はSDS第11項またはNIOSH RTECSによる。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Petroleum Ether ACS Reagent Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
実験室用溶剤(ACS試薬):油脂の抽出、クロマトグラフィー及び再結晶。Adjudicated
使用上の制限: 燃料として、または一般消費者向け製品には使用しないでください。極めて可燃性が高く、発がんのおそれがあります。着火源から遠ざけ、適切な換気のもと、訓練を受けた者のみが使用してください。
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
UN1268, Petroleum distillates, n.o.s. (Petroleum ether), 3, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.7 | 2026-10-07 | Canonical data updated: 22 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.6 | 2026-10-05 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.5 | 2026-10-03 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.4 | 2026-09-30 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-08-05 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-22 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-07-17 | Canonical data re-verified: 7 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.