Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
Available GradesSame CAS, alternate grades and concentrations
Completely miscible with water (dilution releases heat)
Adjudicated
Strong base — hygroscopic; values may drift in opened containers. See storage guidance.
Materials of Construction
Material
Rating
Conditions
Source
metal containers
Not recommended
25% KOH solution
rcilabscan.com
nitrile rubber (glove material)
Compatible
25% KOH solution; full contact and splash contact glove material
rcilabscan.com
corrosion-resistant container with a resistant inner liner
Compatible
25% potassium hydroxide solution; storage
rcilabscan.com
Compatibility is drawn from published manufacturer and supplier documentation for this product; each rating is sourced. Confirm against your specific duty cycle before equipment selection.
214–333 mg/kg (potassium hydroxide, rat); estimated ATE of the 25% solution about 820–1,330 mg/kg (Acute Tox. 4, H302)Adjudicated
急性毒性値はSDS第11項またはNIOSH RTECSによる。
Supplier Qualification Packet
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Potassium Hydroxide 25% Solution Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Industrial uses of potassium hydroxide: detergents/soaps, dyeing and bleaching, paint and varnish removers, electroplating, photo engraving, lithography, alkaline batteries, analytical chemistry, fuel and gas, thickening agent, organic synthesis, stabilizercorecheminc.com
Used in a large number of manufacturing processesstore.astm.org
Chemical for analysis and productionrcilabscan.com
Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.
Use full PPE including chemical splash goggles and alkali-resistant gloves. Add base to water slowly with stirring. Highly exothermic dilution.Class-level guidance — not product-specific; the SDS controls.
Consult Technical Services for product-specific shelf life
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Packaging & Logistics
Shipping Description (US DOT)
UN1814, Potassium hydroxide solution, 8, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
NMFC Class
60
Placard
Corrosive
容器等級
PG II
Revision History
Version
Date
Change
Trigger
1.5
2026-10-08
Canonical data updated: 17 fields changed via the provenance/adjudication pipeline.
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.