Technical Data Sheet
Technical Grade
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Assay as PG, on a dry basis | 99.50 weight % (minimum) | 99.67 wt.% | — | Interpreted |
| Acidity as Acetic Acid | 0.0050 weight % (maximum) | 0.0017 wt% | — | Interpreted |
| Appearance | Pass | Passes test | — | Interpreted |
| Chlorides as Cl | 1.0 weight ppm (maximum) | 0.51 ppm | — | Interpreted |
| Heavy Metals as Pb | 5 weight ppm (maximum) | 0.27 weight ppm | — | Interpreted |
| Iron | 1.00 weight ppm (maximum) | 0.10 ppm | — | Interpreted |
| Propylene glycol | 99.5 % min. | 99.7 % | ILL-003/3-01-17 | Interpreted |
| Suspended Matter | Pass | Passes test | — | Interpreted |
| Water | 0.200 weight % (maximum) | 0.028 % | — | Interpreted |
| Dipropylene glycol (DPG) | 0.5 wt% Max | 0.27 wt% | GC area % (ASTM E202) | Interpreted |
| ash | 0.005 wt.% max | 0.00056 wt% | — | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade Technical Grade | — | — | current | current |
| — | 60% | — | propylene-glycol-60-inhibited | View TDS → |
| Technical | 60% | — | propylene-glycol-60-technical-grade | View TDS → |
| USP | 60% | — | propylene-glycol-60-usp-grade | View TDS → |
| USP Grade | 50% | — | 50-propylene-glycol-usp-grade | View TDS → |
| Technical Grade | 40% | — | 40-propylene-glycol-technical-grade | View TDS → |
| USP Grade | 40% | — | 40-propylene-glycol-usp-grade | View TDS → |
| — | 20% | — | propylene-glycol-20-inhibited | View TDS → |
| Technical | 20% | — | propylene-glycol-20-technical-grade | View TDS → |
| USP | 20% | — | propylene-glycol-20-usp-grade | View TDS → |
| USP Grade | — | — | propylene-glycol-usp-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
One or more physical-property values are temporarily suppressed pending verification against vendor COA data. For complete properties refer to the Safety Data Sheet (SDS) or contact sales@alliancechemical.com.
| Property | 値 | Source |
|---|---|---|
| 外観 | Clear, slightly viscous colorless liquid | Adjudicated |
| 形状 | Liquid | Published reference |
| 臭い | Odorless to mild | Adjudicated |
| 比重 | 1.036–1.040 at 20 °C (water = 1) | Adjudicated |
| 密度 | 1.035 - 1.038 g/cm3 | Interpreted |
| 沸点 | 184–188 °C (363–370 °F) | Adjudicated |
| 融点 | About -60 °C (-76 °F); supercools to a glass rather than crystallizing | Adjudicated |
| 引火点 | 103–107 °C (217–225 °F), closed cup | Adjudicated |
| 蒸気圧 | About 0.1–0.2 mmHg (20–30 Pa) at 25 °C | Adjudicated |
| Solubility (water) | Completely miscible with water | Adjudicated |
| 粘度 | 43–49 mPa·s at 25 °C | Adjudicated |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
急性毒性値はSDS第11項またはNIOSH RTECSによる。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Propylene Glycol Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
熱媒体および不凍液、除氷剤、工業用配合物、樹脂および塗料における溶剤および保湿剤。Adjudicated
使用上の制限: 工業用グレード:食品、医薬品または化粧品用途には使用しないでください。
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Not regulated for transport.
Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.3 | 2026-10-07 | Canonical data updated: 19 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-09-30 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-17 | Canonical data re-verified: 5 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.