Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer.
Identity & Composition
製品名
Sodium Chlorite Flakes 80% - Technical Grade
Alliance Code
sodium-chlorite-80-technical
グレード
Technical
濃度
80%
CAS番号
7758-19-2PubChem
化学式
—PubChem
分子量
90.44PubChem
製品種別
Solution
Specifications
Test
Specification
Typical
Method
Source
Assay (Sodium Chlorite as NaClO2)
77.5 - 82.5 wt%
79.7 wt%
—
Interpreted
Total Alkalinity (as NaOH)
10% as NaOH maximum
2.1 %
—
Interpreted
Arsenic
3 max. ppm
0.057 ppm
—
Interpreted
Sodium Chloride (NaCl)
11 - 19 wt%
16.2 wt%
—
Interpreted
Heavy Metals (as Pb)
20 max ppm
1.2 ppm
—
Interpreted
Hydrogen peroxide (as H2O2)
0.01 max. wt%
0.0010 wt%
—
Interpreted
Lead
10 max. ppm
0.34 ppm
—
Interpreted
Mercury
0.1 max. ppm
0.0072 ppm
—
Interpreted
Sodium carbonate (as Na2CO3)
2 max. wt%
0.58 wt%
—
Interpreted
Sodium chlorate (as NaClO3)
4 max. wt%
1.08 wt%
—
Interpreted
Sodium hydroxide (as NaOH)
3 max. wt%
1.6 wt%
—
Interpreted
Sodium Sulfate (Na2SO4)
3 max wt%
0.58 wt%
—
Interpreted
Water (by difference)
6 max wt%
1.3 wt%
—
Interpreted
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
Available GradesSame CAS, alternate grades and concentrations
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
物理的及び化学的性質
Property
値
Source
外観
White to off-white powder, crystals, or flakes
Interpreted
臭い
Odorless to slight chlorine odor
Adjudicated
pH
10–12 (10–25% solution)
Adjudicated
比重
2.43 (crystal); bulk density about 0.7–1.1 g/cm³ (flake)
Adjudicated
融点
Decomposes at 180–200 °C (356–392 °F) without melting
Adjudicated
引火点
該当しない
Adjudicated
蒸気圧
Negligible (< 1 hPa at 25 °C)
Adjudicated
Solubility (water)
Freely soluble in water (about 390–590 g/L at 20–25 °C)
Adjudicated
Oxidizer — decomposition rate and gas-evolution data may apply. Consult the SDS for material-of-construction guidance under shipping and storage conditions.
Materials of ConstructionService envelope ≈ 80%
MOC ratings are required for this chemical class but no compatibility data has been seeded yet. Treat as no-data and consult Alliance Technical Services before equipment selection.
165–284 mg/kg (rat), the basis for H301Adjudicated
LD₅₀ Dermal (rabbit)
107–134 mg/kg (sodium chlorite); OxyChem reports > 2,000 mg/kg for its flake productAdjudicated
LC₅₀ Inhalation (rat, 4 h)
0.23–0.29 mg/L (dust, rat, 4 h)Adjudicated
急性毒性値はSDS第11項またはNIOSH RTECSによる。
Supplier Qualification Packet
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Sodium Chlorite Flakes 80% - Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Generating chlorine dioxide for bleaching and stripping textiles, pulp, and papershop.chemicalstore.com
Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.
Use PPE including face shield, chemical-resistant gloves, and apron. Avoid contamination — never return unused material to the original container. Ground all transfer equipment.Class-level guidance — not product-specific; the SDS controls.
Consult Technical Services for product-specific shelf life
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Packaging & Logistics
Shipping Description (US DOT)
UN1496, Sodium chlorite, 5.1, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
NMFC Class
65
Placard
Oxidizer
容器等級
PG II
Revision History
Last reviewed 2026-07-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
Version
Date
Change
Trigger
1.4
2026-10-08
Canonical data updated: 21 fields changed via the provenance/adjudication pipeline.
Canonical data re-verified: 5 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
Initial URL-first TDS published from canonical chemistry registry.
initial
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.