Product Documents

Petroleum Ether ACS Reagent Grade

ACS Reagent

CAS Number
8032-32-4
Category
Hydrocarbon & Oxygenated Solvents

Petroleum Ether ACS Reagent Grade (CAS 8032-32-4) is a chemical product supplied by Alliance Chemical in the Hydrocarbon & Oxygenated Solvents category, available as ACS Reagent. For transport it is classified as UN1268, DOT hazard class 3, and packing group II. Its GHS signal word is Danger. Documentation includes a safety data sheet (SDS), a technical data sheet (TDS), and a certificate of analysis (COA), available below and published from Alliance Chemical's canonical product data.

GHS pictogram: FlammableFlammableGHS pictogram: Irritant / harmfulIrritant / harmfulGHS pictogram: Health hazardHealth hazard
CLASS 3 · UN1268Danger
Petroleum Ether ACS Reagent Grade in a 5-gallon metal pail for laboratory extraction, Alliance Chemical
2D chemical structure of Petroleum Ether ACS Reagent Grade
Structure · PubChem

How does Petroleum Ether ACS Reagent Grade ship?

Alliance Chemical ships Petroleum Ether ACS Reagent Grade as UN1268, hazard class 3, packing group II. Transport classification depends on concentration, so this is the classification for this grade specifically — not a generic value for the pure compound.

Transport and hazard communication classification for Petroleum Ether ACS Reagent Grade
FieldValueGoverning regulation
UN NumberUN1268DOT 49 CFR 172.101 Hazardous Materials Table
DOT Hazard Class3DOT 49 CFR 172.101 Hazardous Materials Table
Packing GroupIIDOT 49 CFR 172.101 Hazardous Materials Table
GHS Signal WordDangerOSHA HCS 29 CFR 1910.1200 Appendix C

Values are published only when Alliance Chemical's canonical record is authoritative or cross-verified. The safety data sheet carries the full provenance chain, including section 14 transport information.

Compare all 2 grades of Petroleum Ether
Download document packet (ZIP)SDS, technical data, and a sample certificate of analysis in one file.

About these documents

Alliance Chemical publishes these documents from its canonical product data. Chemical identity, hazard classification, and physical properties are sourced from named authorities (DOT 49 CFR, OSHA, ECHA, PubChem) and internal laboratory records — each value carries per-field provenance and a last-reviewed date. A Certificate of Analysis with lot-specific results ships with every order.

Last reviewed 2026-07-17 by Andre Taki, DOT Hazmat Specialist.