Industrial chemicals · Taylor, TXTechnical Data Sheet
Hydrogen Peroxide 30% Technical
Technical · 30%
Identity & Composition
- Product Name
- Hydrogen Peroxide 30% Technical
- Alliance Code
- hydrogen-peroxide-30-technical
- Grade
- Technical
- Concentration
- 30%
- CAS Number
- 7722-84-1PubChem
- Formula
- H2O2PubChem
- Molecular Weight
- 34.015PubChem
- Product Type
- solution
Specifications
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Assay (H2O2) | 29.0 - 32.0 % | 30.0 % | — | Supplier specification |
| Chloride (Cl) | 10ppm Max | 0.5 ppm | — | Supplier specification |
| Heavy Metals (as Pb) | 5ppm Max | 0.2 ppm | — | Supplier specification |
| Iron (Fe) | 5ppm Max | 0.15 ppm | — | Supplier specification |
| Evaporation Residue | 0.05% Max | 0.02 % | — | Supplier specification |
| Water | 68.0 - 71.0 wt% | 69.7 wt% | Calculated by difference (100 - assay - nonvolatiles); KF titration not valid in a peroxide matrix | Interpreted |
Specification values are guaranteed limits. Typical values are representative of production lots and are not guaranteed. Lot-specific certificates of analysis ship with every order.
Available GradesSame CAS, alternate grades and concentrations
| Grade | Concentration | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade Technical | 30% | — | current | current |
| ACS Grade | 30% | — | hydrogen-peroxide-30-acs-grade | View TDS → |
| Technical Grade | 25% | — | hydrogen-peroxide-25-technical-grade | View TDS → |
| ACS Grade | 15% | — | hydrogen-peroxide-15-acs-grade | View TDS → |
| Technical Grade | 15% | — | hydrogen-peroxide-15-technical-grade | View TDS → |
| ACS Grade | 12% | — | hydrogen-peroxide-12-acs-grade | View TDS → |
| ACS Grade | 10% | — | hydrogen-peroxide-10-acs-grade | View TDS → |
| Technical Grade | 10% | — | hydrogen-peroxide-10-technical-grade | View TDS → |
| ACS Grade | 6% | — | hydrogen-peroxide-6-acs-grade | View TDS → |
| Technical Grade | 6% | — | hydrogen-peroxide-6-technical-grade | View TDS → |
| ACS Grade | 5% | — | hydrogen-peroxide-5-acs-grade | View TDS → |
| Technical Grade | 5% | — | hydrogen-peroxide-5-technical-grade | View TDS → |
| Technical Grade | 3% | — | hydrogen-peroxide-3-technical-grade | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
Physical & Chemical Properties
| Property | Value | Source |
|---|---|---|
| Appearance | Clear, colorless liquid | Supplier specification |
| Form | Liquid | Published reference |
| Odor | ... Slightly sharp odor ... | Published reference |
| pH | 1.50 - 4.50 | Supplier specification |
| Specific Gravity (20 °C) | 1.10 - 1.15 at 20 °C | Supplier specification |
| Density | 1.11 (30% w/w aqueous solution, 20 °C) | Published reference |
| Boiling Point | Not characterized for the 30% solution | Published reference |
| Melting Point | Not characterized for the 30% solution | Published reference |
| Vapor Pressure | 1 mmHg at 59.5 °F (NTP, 1992) | Published reference |
| Solubility (water) | greater than or equal to 100 mg/mL at 72 °F (NTP, 1992) | Published reference |
Oxidizer — decomposition rate and gas-evolution data may apply. Consult the SDS for material-of-construction guidance under shipping and storage conditions.
Materials of ConstructionService envelope ≈ 30%
| Material | Rating | Max T (°C) | Notes | Source |
|---|---|---|---|---|
Buna-N (NBR) elastomer | Not recommended | — | Rapid degradation; never use with oxidizers. | Parker O-ring Chemical Compatibility |
EPDM elastomer | Fair | 60 | Service below 35 %; swelling and embrittlement above. | Parker O-ring Chemical Compatibility |
Viton (FKM) elastomer | Poor | — | Use EPDM or PTFE for sealing | Solvay H2O2 Safety & Handling |
PTFE fluoropolymer | Excellent | 200 | Universal compatibility; preferred lining material. | Cole-Parmer Chemical Compatibility |
PVDF (Kynar) fluoropolymer | Excellent | 100 | Standard for high-purity peroxide service. | Solvay H2O2 Materials of Construction |
Borosilicate Glass glass ceramic | Excellent | 100 | Inert to all oxidizers within normal service temperatures. | Cole-Parmer Chemical Compatibility |
Concrete (untreated) glass ceramic | Not recommended | — | Reactive; line with HDPE/FRP | Solvay H2O2 Safety & Handling |
304 Stainless Steel metal | Fair | 40 | Surface oxidation at higher concentrations; passivate before service. | Cole-Parmer Chemical Compatibility |
316L Stainless Steel metal | Good | 60 | Passive layer stable; avoid prolonged service above 60 °C. | Solvay H2O2 Materials of Construction |
Aluminium 1100/3003 metal | Good | 40 | Limit to dilute service | Solvay H2O2 Safety & Handling |
Brass metal | Not recommended | — | Copper-induced decomposition | Solvay H2O2 Safety & Handling |
Carbon Steel metal | Not recommended | — | Rapid corrosion; never use with oxidizers. | Cole-Parmer Chemical Compatibility |
Copper metal | Not recommended | — | Catalytic decomposition; severe | Solvay H2O2 Safety & Handling |
CPVC thermoplastic | Good | 60 | Acceptable to 60 °C | Solvay H2O2 Safety & Handling |
HDPE thermoplastic | Good | 25 | Good below 25 °C; reaction with peroxides accelerates at higher T. | Cole-Parmer Chemical Compatibility |
Polypropylene thermoplastic | Good | 25 | Service below 35 % at ambient; avoid above 25 °C. | Cole-Parmer Chemical Compatibility |
PVC thermoplastic | Fair | 40 | Embrittlement risk above 40 °C | Solvay H2O2 Safety & Handling |
Ratings reflect the service envelope (concentration × temperature) shown. Always confirm against your specific duty cycle and contact-time before equipment selection. The most cautious rating across overlapping references is shown.
Materials Selection Tool
Showing 17 of 17 materials compatible at the selected envelope.
| Material | Rating | Max T (°C) | Notes |
|---|---|---|---|
Buna-N (NBR) elastomer | Not recommended | — | Rapid degradation; never use with oxidizers. |
EPDM elastomer | Fair | 60 | Service below 35 %; swelling and embrittlement above. |
Viton (FKM) elastomer | Poor | — | Use EPDM or PTFE for sealing |
PTFE fluoropolymer | Excellent | 200 | Universal compatibility; preferred lining material. |
PVDF (Kynar) fluoropolymer | Excellent | 100 | Standard for high-purity peroxide service. |
Borosilicate Glass glass ceramic | Excellent | 100 | Inert to all oxidizers within normal service temperatures. |
Concrete (untreated) glass ceramic | Not recommended | — | Reactive; line with HDPE/FRP |
304 Stainless Steel metal | Fair | 40 | Surface oxidation at higher concentrations; passivate before service. |
316L Stainless Steel metal | Good | 60 | Passive layer stable; avoid prolonged service above 60 °C. |
Aluminium 1100/3003 metal | Good | 40 | Limit to dilute service |
Brass metal | Not recommended | — | Copper-induced decomposition |
Carbon Steel metal | Not recommended | — | Rapid corrosion; never use with oxidizers. |
Copper metal | Not recommended | — | Catalytic decomposition; severe |
CPVC thermoplastic | Good | 60 | Acceptable to 60 °C |
HDPE thermoplastic | Good | 25 | Good below 25 °C; reaction with peroxides accelerates at higher T. |
Polypropylene thermoplastic | Good | 25 | Service below 35 % at ambient; avoid above 25 °C. |
PVC thermoplastic | Fair | 40 | Embrittlement risk above 40 °C |
Regulatory & Transport
DOT / 49 CFR
- UN Number
- UN2014Adjudicated
- Hazard Class
- 5.1Adjudicated
- Packing Group
- IIAdjudicated
- Proper Shipping Name
- Hydrogen peroxide, aqueous solutions with not less than 20 percent but not more than 40 percent hydrogen peroxide (stabilized as necessary)Adjudicated
GHS / OSHA HazCom 2012
- Signal Word
- DangerAdjudicated
- H-Codes (Hazard Statements)
- H272, H302, H314, H332, H335Adjudicated
- P-Codes (Precautionary Statements)
- P210, P220, P260, P261, P264, P270, P271, P280, P301+P312, P301+P330+P331, P303+P361+P353, P304+P340, P305+P351+P338, P310, P312, P321, P330, P363, P370+P378, P403+P233, P405, P501Adjudicated
Occupational Exposure Limits
- OSHA PEL (29 CFR 1910.1000)
- 1 ppm TWAOSHA 29 CFR 1910.1000
- ACGIH TLV
- —no canonical
- NIOSH REL
- 1 ppm TWANIOSH Pocket Guide
- NIOSH IDLH
- 75 ppmNIOSH Pocket Guide
Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: ECHA CLP Annex VI for harmonised classifications, NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.
Supplier Qualification Packet
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Hydrogen Peroxide 30% Technical. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Catalog EquivalentsCross-reference vs major chemical suppliers
Honeywell
| SKU | Grade | Conc. | Match | Notes |
|---|---|---|---|---|
| 95302 | ACS | 30% | Exact | Fluka brand, ACS grade |
Sigma-Aldrich
| SKU | Grade | Conc. | Match | Notes |
|---|---|---|---|---|
| 216763 | ACS Reagent | 30% | Exact | Stabilized; ACS Reagent |
Cross-references are informational. Confirm against the manufacturer's current specification before substitution. Competitor trademarks are property of their respective owners.
Applications
- Disinfecting surfaces and textileslaballey.com
- Disinfecting hard surfaces such as tile, countertops, glass and metalslaballey.com
- Educational or research laboratory uselaballey.com
Applications are drawn from published manufacturer and supplier documentation; each is sourced. Suitability for a specific use is the buyer's to confirm.
Storage & Handling
- Recommended Storage
- Cool, well-ventilated area, away from heat, sunlight, and combustibles. Vented containers only — pressure may develop from slow decomposition. Original sealed containers; segregate from organics, metals (especially copper, iron, manganese), and reducing agents.Class-level guidance — not product-specific; the SDS controls.
- Handling Precautions
- Use PPE including face shield, chemical-resistant gloves, and apron. Avoid contamination — never return unused material to the original container. Ground all transfer equipment.Class-level guidance — not product-specific; the SDS controls.
- Incompatibilities
- Combustible materials, organic compounds, reducing agents, transition metal salts (catalytic decomposition), strong bases.Class-level guidance — not product-specific; the SDS controls.
- Shelf Life
- Consult Technical Services for product-specific shelf life
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Packaging & Logistics
Shipping Description (US DOT)
UN2014, Hydrogen peroxide, aqueous solutions with not less than 20 percent but not more than 40 percent hydrogen peroxide (stabilized as necessary), 5.1, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
Revision History
Last reviewed 2026-07-17 by Andre Taki, DOT Hazmat Specialist.
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.4 | 2026-07-22 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-07-21 | Canonical data updated: 3 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-17 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-07-17 | Canonical data re-verified: 7 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.