Industrial chemicals · Taylor, TXTechnical Data SheetTechnical Data Sheet
Nitric Acid 65% Technical Grade
Technical · 65%
1. Identity & Composition
- Product Name
- Nitric Acid 65% Technical Grade
- Alliance Code
- nitric-acid-65-technical-grade
- Grade
- Technical
- Concentration
- 65%
- CAS Number
- 7697-37-2Adjudicated
- Formula
- HNO3Adjudicated
- Molecular Weight
- 63.013Adjudicated
- Product Type
- solution
Available GradesSame CAS, alternate grades and concentrations
| Grade | Concentration | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade Technical | 65% | — | current | current |
| ACS Grade | 70% | — | nitric-acid-70-acs-grade-low-particle | View TDS → |
| Technical | 70% | — | nitric-acid-70-technical-grade | View TDS → |
| — | 69% | — | nitric-acid-acs-69-55-gallon-drum | View TDS → |
| Technical | 69% | — | nitric-acid-69-technical-grade | View TDS → |
| — | 40% | — | nitric-acid-40 | View TDS → |
| — | 25% | — | nitric-acid-25 | View TDS → |
| — | 20% | — | nitric-acid-20 | View TDS → |
| — | 5% | — | nitric-acid-5 | View TDS → |
Typical assay shown is the rolling-window mean from the sibling product's most recent lots. Grade selection drives downstream end-use — verify the sibling grade matches your specification before substitution.
Materials of ConstructionService envelope ≈ 65%
| Material | Rating | Max T (°C) | Notes | Source |
|---|---|---|---|---|
Buna-N (NBR) elastomer | Poor | — | Swells and degrades | Cole-Parmer Chemical Compatibility |
EPDM elastomer | Good | 40 | Acceptable but FKM preferred | Cole-Parmer Chemical Compatibility |
Viton (FKM) elastomer | Excellent | 80 | Preferred elastomer | Cole-Parmer Chemical Compatibility |
PTFE fluoropolymer | Excellent | 200 | Lining and gaskets | Cole-Parmer Chemical Compatibility |
Borosilicate Glass glass ceramic | Excellent | 100 | Inert to most strong acids (avoid HF). | Cole-Parmer Chemical Compatibility |
Glass (borosilicate) glass ceramic | Excellent | 100 | Inert under all conditions | Cole-Parmer Chemical Compatibility |
316 stainless steel metal | Poor | 25 | Severe pitting; use only for vapors | Cole-Parmer Chemical Compatibility |
Aluminium metal | Not recommended | — | Reacts to form H2 gas | Cole-Parmer Chemical Compatibility |
Carbon steel metal | Not recommended | — | Aggressive corrosion | Cole-Parmer Chemical Compatibility |
Carbon Steel metal | Not recommended | — | Catastrophic corrosion; never use. | Cole-Parmer Chemical Compatibility |
Hastelloy C-276 metal | Excellent | 90 | Premium HCl alloy | Cole-Parmer Chemical Compatibility |
Inconel 625 metal | Good | 60 | Acceptable for dilute service | Cole-Parmer Chemical Compatibility |
Tantalum metal | Excellent | 100 | Best-in-class but expensive | Cole-Parmer Chemical Compatibility |
CPVC thermoplastic | Excellent | 90 | Preferred for elevated temperature | Cole-Parmer Chemical Compatibility |
FRP (vinyl ester) thermoplastic | Good | 60 | Common bulk-storage tank material | Cole-Parmer Chemical Compatibility |
HDPE thermoplastic | Excellent | 60 | Standard drum / IBC material | Cole-Parmer Chemical Compatibility |
PVC thermoplastic | Excellent | 60 | Standard piping for ambient service | Cole-Parmer Chemical Compatibility |
Ratings reflect the service envelope (concentration × temperature) shown. Always confirm against your specific duty cycle and contact-time before equipment selection. The most cautious rating across overlapping references is shown.
Materials Selection Tool
Showing 17 of 17 materials compatible at the selected envelope.
| Material | Rating | Max T (°C) | Notes |
|---|---|---|---|
Buna-N (NBR) elastomer | Poor | — | Swells and degrades |
EPDM elastomer | Good | 40 | Acceptable but FKM preferred |
Viton (FKM) elastomer | Excellent | 80 | Preferred elastomer |
PTFE fluoropolymer | Excellent | 200 | Lining and gaskets |
Borosilicate Glass glass ceramic | Excellent | 100 | Inert to most strong acids (avoid HF). |
Glass (borosilicate) glass ceramic | Excellent | 100 | Inert under all conditions |
316 stainless steel metal | Poor | 25 | Severe pitting; use only for vapors |
Aluminium metal | Not recommended | — | Reacts to form H2 gas |
Carbon steel metal | Not recommended | — | Aggressive corrosion |
Carbon Steel metal | Not recommended | — | Catastrophic corrosion; never use. |
Hastelloy C-276 metal | Excellent | 90 | Premium HCl alloy |
Inconel 625 metal | Good | 60 | Acceptable for dilute service |
Tantalum metal | Excellent | 100 | Best-in-class but expensive |
CPVC thermoplastic | Excellent | 90 | Preferred for elevated temperature |
FRP (vinyl ester) thermoplastic | Good | 60 | Common bulk-storage tank material |
HDPE thermoplastic | Excellent | 60 | Standard drum / IBC material |
PVC thermoplastic | Excellent | 60 | Standard piping for ambient service |
Regulatory & Transport
DOT / 49 CFR
- UN Number
- UN2031Adjudicated
- Hazard Class
- 8Adjudicated
- Packing Group
- IIAdjudicated
- Proper Shipping Name
- Nitric acid, other than red fuming, with at least 65 percent, but not more than 70 percent nitric acidAdjudicated
GHS / OSHA HazCom 2012
- Signal Word
- DangerAdjudicated
- H-Codes (Hazard Statements)
- —unknown
- P-Codes (Precautionary Statements)
- —unknown
Occupational Exposure Limits
- OSHA PEL (29 CFR 1910.1000)
- —unknown
- ACGIH TLV
- —unknown
- NIOSH REL
- —unknown
- NIOSH IDLH
- —unknown
Transport descriptions reflect 49 CFR 172.101 lookup at time of publication. Sourced data: ECHA CLP Annex VI for harmonised classifications, NIOSH Pocket Guide for REL/IDLH, OSHA Z-Tables for PEL. Always verify against the latest regulatory text before shipment-critical decisions.
Supplier Qualification Packet
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Nitric Acid 65% Technical Grade. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Application Guidance
Nitric Acid 65% Technical Grade (Technical) is a strong mineral acid used across pH control, metal pickling, food and beverage processing, and chemical synthesis. Grade and concentration determine the appropriate end-use and materials.
- Metal pickling, etching, and surface preparation
- pH adjustment in water and wastewater treatment
- Regeneration of ion-exchange resins
- Chemical manufacturing and synthesis
- Food and beverage processing (food-grade only)
Always add acid to water, never water to acid. Use lined or fluoropolymer piping rated for the concentration; carbon steel is not suitable for dilute acid service.
Storage & Handling
- Recommended Storage
- Cool, dry, well-ventilated area in compatible containers (lined steel, HDPE, FRP — verify per concentration). Segregate from bases, oxidizers, metals, and cyanides.
- Handling Precautions
- Use full PPE including face shield, acid-resistant gloves and apron. Add acid to water slowly with stirring; never reverse. Ventilation required.
- Incompatibilities
- Bases, active metals (aluminium, zinc), cyanides, sulfides, oxidizing agents. Reacts violently with organic anhydrides.
- Shelf Life
- 24 months from date of manufacture in sealed, original packaging
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Packaging & Logistics
Shipping Description (US DOT)
UN2031, Nitric acid, other than red fuming, with at least 65 percent, but not more than 70 percent nitric acid, 8, PG II
Sourced from 49 CFR 172.101. Confirm against shipping documents and carrier requirements before tender.
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.