Technical Data Sheet
20%
| Test | Specification | Typical | Method | Source |
|---|---|---|---|---|
| Assay | 20.0 - 21.0 % v/v (≈ 20.5 - 21.6 % w/w) | 20.14 % v/v | — | Interpreted |
| Freeze point | 18.7 °F (-7.4 °C) max | 18.5 °F (-7.5 °C) | ASTM D1177 | Interpreted |
| Total hardness of dilution water | < 100 ppm as CaCO3 | 0.33 ppm as CaCO3 | ASTM D1126 | Interpreted |
| Dipropylene glycol (DPG) | 0.1 wt% max | 0.039 wt% | GC area % (ASTM E202) | Interpreted |
| Reserve alkalinity | ≥ 2.0 mL at 20 % v/v propylene glycol | 2.4 | ASTM D1121 | Interpreted |
| Acidity as Acetic Acid | 0.001 % max | 0.00024 % | — | Interpreted |
| Chlorides as Cl | 0.52 ppm max | 0.064 ppm | — | Interpreted |
| Heavy Metals as Pb | 1 ppm max | 0.048 ppm | — | Interpreted |
| Iron | 0.21 ppm max | 0.025 ppm | — | Interpreted |
| ash | 0.001% max | 0.00011 % | — | Interpreted |
| Color, Pt-Co | 10 APHA (maximum) | 1 APHA | — | Interpreted |
| Appearance | Pass | Passes test | — | Interpreted |
| Suspended Matter | Pass | Passes test | — | Interpreted |
| Composition | 20 % propylene glycol by volume (20 volumes propylene glycol to 80 volumes deionized water), with the OAT inhibitor package at 2 % w/w of the batch | Conforms | By formulation; batch weights (scale ticket) | Interpreted |
Values are reproduced from the current product reference. Source labels do not by themselves establish a supplier guarantee or a test result for your lot. Confirm applicable acceptance limits and request lot-specific documentation.
| グレード | 濃度 | Typical Assay | SKU | TDS |
|---|---|---|---|---|
| This grade — | 20% | — | current | current |
| — | 60% | — | propylene-glycol-60-inhibited | View TDS → |
| Technical | 60% | — | propylene-glycol-60-technical-grade | View TDS → |
| USP | 60% | — | propylene-glycol-60-usp-grade | View TDS → |
| USP Grade | 50% | — | 50-propylene-glycol-usp-grade | View TDS → |
| Technical Grade | 40% | — | 40-propylene-glycol-technical-grade | View TDS → |
| USP Grade | 40% | — | 40-propylene-glycol-usp-grade | View TDS → |
| Technical | 20% | — | propylene-glycol-20-technical-grade | View TDS → |
| USP | 20% | — | propylene-glycol-20-usp-grade | View TDS → |
| Technical Grade | — | — | propylene-glycol-technical-grade | View TDS → |
| USP Grade | — | — | propylene-glycol-usp-grade | View TDS → |
各グレードの代表的な含量は、直近ロットの平均値です。代替品として使用する前に、そのグレードがお客様の仕様を満たしていることをご確認ください。
| Property | 値 | Source |
|---|---|---|
| 外観 | Clear, colorless to pale yellow liquid (not dyed) | Adjudicated |
| 臭い | Mild, characteristic | Adjudicated |
| pH | Typically 7.0-9.0 (ASTM D1287); measured value reported on the lot Certificate of Analysis | Adjudicated |
| 比重 | 1.020 at 20/20 °C (water = 1) | Adjudicated |
| 密度 | 1.0177 g/cm³ at 20 °C | Adjudicated |
| 沸点 | approx. 101 °C (214 °F) at 760 mmHg | Adjudicated |
| 融点 | Freeze point approx. -7.4 °C (18.7 °F) at 20 % v/v propylene glycol | Adjudicated |
| 引火点 | Not flammable (aqueous solution) | Adjudicated |
| Solubility (water) | Miscible with water | Adjudicated |
輸送情報は発行時点の49 CFR 172.101の照会結果を反映しています。データ出典:REL/IDLHはNIOSH Pocket Guide、PELはOSHA Zテーブル。出荷に関わる重要な判断の前に、必ず最新の規制本文で確認してください。
One zipped download containing the TDS, SDS, latest lot COA (when available), and a fresh Letter of Continuing Guaranty for Propylene Glycol 20% Inhibited. Every file included is SHA-256 hashed and listed in a manifest your QA team can audit.
Propylene Glycol 20% Inhibited is a glycol-based heat-transfer and freeze-protection fluid. Concentration sets the freeze and burst protection; the inhibitor package sets how long the system stays protected from corrosion.
必要な凍結・破裂防止性能に対して濃度を確認し、使用温度におけるエラストマーおよび金属材料との適合性を確認してください。食品または飲料水への偶発的な接触が起こり得る用途には、USPグレードまたは食品グレードのプロピレングリコールのみが適しています。インヒビター入りグレードは密閉系の熱媒体用途専用です。
For full hazard, PPE, and emergency response guidance, refer to the Safety Data Sheet (SDS) for this product. The SDS controls in all cases where guidance differs.
Not regulated for transport.
本製品を25,000 lb(11,350 kg、約2,930米ガロン)以上収納する包装物は報告対象数量(RQ)を含み、次の記載で輸送されます:
UN3082, Environmentally hazardous substance, liquid, n.o.s. (Sodium nitrite), 9, III, RQ
Confirm against shipping documents and carrier requirements before tender.
Last reviewed 2026-06-17 by Andre Taki, Chief Commercial Officer, DOT Hazmat–certified (49 CFR 172.704).
| Version | Date | Change | Trigger |
|---|---|---|---|
| 1.8 | 2026-11-04 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.7 | 2026-10-21 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.6 | 2026-10-20 | Canonical data updated: 2 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.5 | 2026-10-13 | Canonical data updated: 4 fields changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.4 | 2026-09-24 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.3 | 2026-09-09 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.2 | 2026-07-24 | Canonical data updated: 1 field changed via the provenance/adjudication pipeline.
| canonical_change |
| 1.1 | 2026-06-17 | Canonical data re-verified: 3 fields updated against independent vendor SDSs, CLP Annex VI, 49 CFR, and OSHA HazCom 2024 (GHS classification, hazard/precautionary codes, signal word, physical properties as applicable).
| canonical_change |
| 1.0 | 2026-05-20 | Initial URL-first TDS published from canonical chemistry registry. | initial |
This Technical Data Sheet is provided for technical reference. The Safety Data Sheet (SDS) controls in all cases where guidance differs. Values reflect Alliance Chemical canonical data at time of generation; subsequent revisions are recorded in the Revision History above.